Eiki LC-XC1 owner manual Recalls the data previously adjusted, Closes Image Menu, Reset

1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box IMAGE MENU will appear.

2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the function that you want to select and then press SELECT button.

Normal picture level preset on this projector. This picture level can be set by pressing the NORMAL button.

Picture level adjusted for the picture with fine tone.

Picture level adjusted manually in the custom setting dialog box.

When selecting “∀,” the custom setting dialog box will appear. Move the arrow to the item that you want to change by pressing the POINT UP/DOWN button, and adjust each value by pressing the SELECT button to match

with the image.

Adjust the picture as necessary to eliminate flicker trom the display. (From 0 to 127.)

The number of the total dots in one horizontal period. Adjust the number to match your PC image.

Move the arrow to the color that you want to adjust. Point to ∀ to lighten the color and select ! to deepen the color. (From 0 to 63.)

Point to ∀ to decrease contrast, and select ! to increase contrast. (From 0 to 63.)

Point to ∀to adjust the image darker, and select ! to adjust brighter. (From 0 to 63.)

NOTE:

Point to ∀ to soften the image, and select ! to sharpen the image (From 0 to 15.)

Each of the keys operates as follow.

		Recalls the data previously adjusted.
	Reset
		Stores the adjusted data in the memory.
Stored
		Closes IMAGE MENU.
Quit

LC-XC1

The Fine sync and the Total dots cannot be operated when the input signal is from the COMPUTER INPUT-i (DIGITAL) terminal or “RGB” is selected on SYSTEM MENU (P24 and 25).

The Fine sync and the Total dots cannot be fully adjusted when “HDTV1O35i” or “HDTV1O8Oi” is selected on SYSTEM MENU (P24 and 25).

28