Toshiba 27AFX54 appendix Adding channels to the TV’s memory, Changing channels

Adding channels to the TV’s memory

Your TV will stop on specific channels that are stored in the TV’s channel memory when you press Channel ▲ or ▼. Use the steps below to set all active channels in your area automatically.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase channels manually.

To add channels automatically:

1.Press MENU, then press or to display the SETUP menu.

2.Press ▲ or ▼ until the TV/CABLE ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿selection is highlighted.3. Press or to highlight eitherTV or CABLE, depending onwhich you use.If you use an antenna, choose TV.If you use cable, choose CABLE.

4.Press ▼ to select CH PROGRAM.

5.Press or to start channel programming. The TV will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.

While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.

6.When channel programming is complete, the message “COMPLETED” appears.

7.Press CH ▲ or ▼ to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.	Select the channel you want to add or erase.
	If adding channels, you must select the channel to add using the
4.	Channel Number buttons.				￿￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿
	Press	or to select ADD or
2.	Press MENU, then press		or				￿￿		￿￿￿￿￿￿
	to display the SETUP menu.			￿
3.	Press ▲ or ▼ to highlight ADD/			￿￿￿				￿￿￿￿￿￿
	ERASE.
	ERASE, whichever function you
	want to perform.					￿￿￿￿

5.Repeat steps 1-4 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:

Press Channel ▼ or ▲ on the TV or CH ▲ or ▼ on the remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100) on the remote control.

For example, to select channel 125, press 100, 2, 5.

17

Channel

Numbers

Menu

Exit

Channel ▲▼

Safeguards

Toshiba

your TV

Remote Control

your TV

Features

Important

Welcome to

Connecting

Using the

Setting up

Using the

TV’s

Appendix

3N11601A/E P07-17 17 1/19/04, 6:01 PM