AT&T 2.1.1 manual Floppy Diskette

Page 100

Software Installation

22.When prompted to reboot the system, remove disk 1 from the floppy disk drive. Press ( Ctrl ) + ( Alt ) + ( Del ) simultaneously to reboot.

23.At the prompt requesting the installation medium, type f for

Floppy Diskette.

24.When prompted, insert disk 2 into the floppy disk drive and press(Enter).

25.Continue loading disks as prompted.

N O T E :

Each remaining disk takes 3 to 5 minutes to copy to the hard disk.

After the last disk has been loaded, you will be prompted to remove it. The following message displays:

Enter password for the root or super-user.

NOTE:

This password must be kept EXTREMELY SECURE. Follow your standard security procedures for password security.

BE SURE the System Manager has all the necessary passwords.

26.Type the password that has been selected for root by the System Manager. The password does not appear. Press (Enter) after typing the password.

You are prompted to reenter the password.

27.Type the password a second time and press (Enter). You are prompted for the install password.

28.Type the password that has been selected for install by the System Manager. The password does not appear. Press (Enter) after typing the password.

You are be prompted to reenter the password.

3-14

Image 100
Contents Audix Voice Power 585-310-108 Issue 1, DecemberFCC Warning Statement Contents 6386E/33 WGS Software Installation Configuration Testing and TroubleshootingUpgrade Procedures Recovering from System FailuresInstalling a Second Hard Disk IndexSecuring the Board Removing SIMMs from the Memory Expansion BoardPrinter Operation Panel About This Guide Purpose and ScopeIntended Audience AssistanceConventions Used in This Guide Shown in this style of typeInformation Conventions Document No Related DocumentsDocument No -200-1 Introduction Preassembled SystemsPhysical Requirements Selecting a SiteMaterials Checklist DescriptionCheckDescriptionCheck Remote Terminal Package System Diagram T ESystem Diagram Hardware Installation Hardware OverviewHardware Installation General Installation Instructions Opening and Closing the Case Opening the 6386 WGS 6386 WGS Main Cover-Securing ScrewsOpening the 6386E WGS 6386E WGS Removing Top Cover E WGS Access Cover Removal Opening the 6386/SX WGS SX WGS Main Cover-Securing ScrewsOpening the 6386/25 WGS 25 WGS Main Cover-Securing ScrewsOpening the 6386E/33 WGS E/33 WGS Removing Outside Cover E/33 WGS Access Cover Removal General Instructions For Installing Circuit Boards Removing the Slot Cover Inserting a Circuit Board into an Expansion Slot 10. Securing the Board Installing Additional Memory Installing Additional Memory in the 6386 and 6386E WGST E 12. Removing SIMMs from the Memory Expansion Board Hardware Installation 13. Installing SIMMs on the Memory Expansion Board 14. Switch L07LL-1 through L07LL-8 Hardware Installation 16. Location of Memory Simm Sockets on the 6386/SX WGS Sockets Expansion Slots Sockets 19. Location of Memory Simm Sockets on the 6386E/33 WGS 20. Inserting the SIMMs into Sockets Setting Motherboard Jumpers on the 6386/25 and 6386E/33 WGS Total onboard RAM 8MBHardware Installation Hardware Installation 23. Location of Motherboard Jumpers on the 6386E/33 WGS On the 6386/25 WGS Version Onboard RAM Configuration JumpersOn the 6386E/33 WGS Serial Port Configuration Jumpers Replacing Disk Drive CablesVDC600Board Configuration and Installation 24. VDC600 Switch and Jumper Locations and Settings IVP4 Board Configuration and Installation Configuration of New Boards 26. Factory Switch ConfigurationsConfiguration of Previously Installed Boards Setting Switch SW1.1 27. Settings for SW1.128. Settings for SW12.1 Determining the Board Configuration by Testing If the numbers do not agree, proceed to Step Hardware Installation Hardware Installation Configuration Management window appears Voice System Administration window appearsRenumbering Voice Channels Move the cursor to Renumber Voice Channels DCP Board Configuration and Installation 29. Location of Jumpers on DCP BoardConnecting Peripherals and Cables 30 WGS System Module Back Panel 31 E WGS System Module Back Panel 32 /SX WGS System Module Back Panel 34 E/33 WGS System Module Back Panel Configuration the Setup Utility Hard diskRunning Setup from a Floppy Disk You may find it necessary to modify the Extended For the 6386/SX, 6386/25, and 6386E/33 WGS, if you are Connecting Voice and Data Lines Connecting the IVP Voice Lines35. IVP4 Board with 884A Adapter for RJ11C Setting Up a Report Printer Connecting the DCP Data LineHardware Installation Will be in Function Mode with function When pressed in Menu Mode, causesSelected. Also pressing When Printer to store the selected value forSetting the Control Values Connecting the Printer Diagnostics Follow the directions on the screen to run the diagnosticsInstalling a Remote-Access Modem Software Installation Pre-Installation Considerations T EVerifying Hard Disk Size To install the Unix operating system, follow these steps Installing the Unix Operating SystemWait for the following prompt to display Create a partition ========= ======Type 100 and press Enter Following message displays Type Y and press Enter Partition menu displays againSystem displays the following message At the end of the analysis, the following displaysType y and press Enter System displays Type y and press Enter System displays the followingT E Disk Size Cylinders File Area Written down in the procedure Verifying Hard Disk Size Enter number of cylinders System calculates the value for /usr2Floppy Diskette System will be rebuilt Only Verifying Unix System Installation Software InstallationInstalling Audix Voice Power Creating a Login for Voice AdministrationT E Please indicate the installation medium you intend to use Installing Integrated Voice Power System Software PressEnter to return to the # promptT E Press 1 and Enter to enable the parallel port Interrupts System displays Monitor Type System displaysEnter the appropriate answer and press Enter Memory Configuration Speech System displays Software Installation Installing Audix Voice Power Application Software T E Please indicate the installation. medium you intend to use Type audix and press Enter. You are asked to confirm Installing the Switch Integration Software Page Installing Cartridge Tape Utility Software System displays a list of interrupts. Then it displays Installing Software for Remote Access Press F2 CHOICES. Continue pressingT E Enter a filename, ‘all’, ‘done’, or ‘files’ Verifying Software Components Printer Software Setup System Administration menu is displayedSoftware Installation Acceptance Testing Completing InstallationPress F3 Save T E Testing the IVP4 Switch Settings Peripheral Setup menu appearsEnable/Disable Second Serial Port menu appears DCP ConflictConfiguration Testing Troubleshooting Troubleshooting is limited to two areasPower-On Self Test Hardware VerificationMotherboard problem Bad controller Motherboard problemScreen Item Cause of FailureHard Disk Failure Motherboard Failure Data CorruptionGeneral Diagnostics IVP4 Board Diagnostics Voice System Administration menu is displayedApplication Operation Problems Press F3 Save to begin executionUser Response Message Waiting Lamp will not turn on or offTrouble Indication Unable to login to the Voice Mail Service Outcalls not being made reliably User ResponseTrouble Indication Stop and restart the voice systemUpgrade Procedures Upgrade Procedures Upgrading from Release 1.1 to ReleaseT E Upgrade Procedures Face Face Help Fmli Type y or n as appropriate Type y and press Enter Following message appears Type y and press Enter Following messages appearUpgrade Procedures You will now see a series of .‘ s Upgrade Procedures Upgrade Procedures Upgrading from Release 2.0 toTalkfile 46 phrase all t a l k f i l e 4 7 p h r a s e a l l Upgrade Procedures Upgrade Procedures Do you wish to continue removal Audix Voice Power? Upgrade Procedures T E Upgrade Procedures Parallel Ports System displays Monitor Type System displays Enter the appropriate answer Adds the following message Unix Kernel has been rebuiltPlease indicate the installation medium you intend to use T E Upgrade Procedures Scrpwdb T E Upgrade Procedures Upgrade Procedures Backing Up Administrative Files At the Personal Backup menu, move the cursor to Selective Backing Up Speech Files Restart the procedure Backing Up Speech Files Formatting a Floppy Disk Upgrade Procedures Recovering from System Failures Recovering from Motherboard Failure Recovering from Hard Disk CrashRecovering from Data Corruption Confidence Test Materials Required for Restoring Files Restoring FilesRestoring Administrative Files Restore in progress Restoring Speech Files Restoring speechBe sure to return all channels to Inserv Installing a Second Hard Disk IntroductionInstalling the Second Hard Disk Usr/vmdb Usr/ocdbOperating System, in Chapter Appendix a Installing a Second Hard Disk Modification software, installation Backup Cartridge Tape Utility software, installingCreating, voice administration login DCP Board Conflict with serial port 2,3-45installationGrounding procedure Humidity requirements InstallationFiles, restoring HardwareProblems, application operation Recovery from Remote-access, installing modem, 2-66RequirementsTouch-Tone, keys representation Upgrading Unix operating system installationVerifying
Related manuals
Manual 62 pages 6.44 Kb Manual 231 pages 48.05 Kb