AT&T 2.1.1 manual Hardware Installation

Hardware Installation

5.Install each memory board in a 32-bit slot (3 connectors). Use the leftmost available slots on the 6386 WGS and the rearmost available slots on the 6386E WGS. The order in which the boards are inserted does not matter. Follow the general instructions for installing circuit boards given in the section General Installation Instructions in this chapter.

6.After modifying the memory configuration, you must run the SETUP program. For details on how to run the SETUP program, refer to the section Configuration: the SETUP Utility in this chapter. If you have installed 8 MB of memory on your system, the Extended Memory Size should be modified to 7168 kB.

Installing Additional Memory

in the 6386/SX, 6386/25, and 6386E/33 WGS

The 6386/SX, 6386/25 and 6386E/33 WGS processors can have up to 8 MB of memory installed on the motherboard.

NOTE:

There are two different versions of the 6386/25 motherboard. See Figures 2-17and 2-18to determine which version of the motherboard you have.

2-24