Software Installation
3.Press (Enter) to proceed with the installation. The system prompts you with the message:
Is this a new installation or a release upgrade to your existing system? (Strike 'n' (new) or 'u' (upgrade) followed by ENTER)
4.Type n and press (Enter).
The system prompts you with the message:
WARNING : A new installation of the UNIX System will destroy all files currently on the system. Do you wish to continue (y or n)?
5.Type Y and press (Enter).
The system prompts you to partition the hard disk with the following messages:
Total hard disk size is xxxx cylinders Cylinders
Partition Status Type Start End Length
THERE ARE NO PARTITIONS CURRENTLY DEFINED. SELECT ONE OF THE FOLLOWING:
1.Create a partition
2.Change Active (Boot from) partition
3.Delete a partition
%
= = =
4.Exit (Update disk configuration and exit )
5.Cancel (Exit without updating disk configuration)
Enter Selection: 1