Upgrade Procedures
9.Install the Switch Integration package (if necessary) by following this procedure:
N O T E :
If installing an integrated system, refer to the Switch Notes document for your telephone system for additional information.
a.At the # prompt, type installpkg and press (Enter). For systems with an installed tape drive:
— The system displays
Please indicate the installation medium you intend to use.
Strike C to install from CARTRIDGE TAPE or F to install from FLOPPY disk.
Strike ESC to stop.
—Type f.
For systems with more than one floppy disk drive:
— The system displays
This system has two floppy drives. Strike ENTER to install from drive 0 or 1 to install from drive 1.
—Type 1 and press (Enter) to select drive 1, or just press (Enter) to select drive 0.