Software Installation
3.Insert the Cartridge Tape Utility Package disk in the floppy disk
drive and press (Enter). (This is a UNIX package that comes with the UNIX Operating System Foundation Set.
4.The system displays
Installing Cartridge Tape Utilities
Available interrupts(s) for the Cartridge
Tape Utilities:
The system displays a list of interrupts. Then it displays
Type the interrupt number and strike the
ENTER key or type Q to cancel installation.
Type 3 to choose interrupt 3 and press (Enter).
5.The system displays a message to confirm the settings.
Confirm
You are installing the Cartridge Tape Utilities using hardware interrupts number X and addresses XXX through YYY. Be sure that these values are not in use by another
Strike ENTER when ready or ESC to stop.
Press (Enter) to confirm your selection.
6.Remove the disk when the installation is complete.
7.The system prompts you for a shutdown. Press (Enter) to shut
down the system. When you are prompted to reboot the system, press (Ctrl) + (Alt) + (Del) simultaneously.