AT&T 2.1.1 manual Opening the 6386 WGS, WGS Main Cover-Securing Screws

Hardware Installation

Opening the 6386 WGS

Follow these steps to remove the cover:

1.Be sure the system power is turned OFF. If any cables have been connected to the system module, disconnect them.

2.Unlock the cover lock. (A set of keys is provided with the system module.)

3.Loosen the two main cover-securing screws (A and B) on the back panel as shown in Figure 2-1.

B

A

Figure 2-1.6386 WGS Main Cover-Securing Screws

2-5