Upgrade Procedures
■Parallel Ports
The system displays
For the parallel port (interrupt level 7), would you like to:
l)ENABLE the parallel port.
2)DISABLE the parallel port.
Please enter your selection [1 or 2]:
Press 1 and (Enter) to enable the parallel port. The system confirms your choice.
■Interrupts
The system displays
Select the interrupt number of T/R boards.
Press <Enter> for default value
[2]or [2, 3, 5,or 15] or q to quit.
Press (Enter) to select the default value 2. You receive the following message:
Interrupt number<number selected> will be used for TR boards.
Press <Enter> to confirm or any other key to reject.
Press (Enter) again. The system displays the following message:
Moving files for IVPSS Software! It will take a few minutes!