Recovering from System Failures
Restoring Speech Files
The voice system should be running before restoring files. Both the administrative files and the speech files must be restored together. You cannot restore the system without both.
CAUTION:
Be sure to remove all channels from service by changing their state to MANOOS to prevent loss of data before beginning the restore procedures. Refer to Changing the State of Voice Channels for instructions.
To restore speech files, follow these steps:
1.At the Restore from Removable Media menu, move the cursor to
Speech Restore and press (Enter). The Speech Restore menu appears.
2.At the Speech Restore menu, move the cursor to Restore All Talkfiles/Phrases and press (Enter).
If you have more than one floppy disk drive or a cartridge tape drive, the Select Removable Media menu appears. Make your choice and press (Enter).
A restore confirmation message appears telling you to insert the disk or tape containing files you want to restore.
3.Insert the disk or tape and press (Enter).
After the restore starts, the following message displays:
Restoring speech.
4.When the system informs you that it has completed the restore, remove the cartridge tape or last disk and press (Enter).
5.Press [F6] (CANCEL) repeatedly to return to the AT&T FACE menu.