AT&T 2.1.1 manual You may find it necessary to modify the Extended

Hardware Installation

5.Use to move the highlight to Setup Utility and press (Enter) .

—SETUP displays the current settings for the system on a scrollable menu (6386/SX, 6386/25, and 6386E/33 WGS) or on two pages (6386, 6386E WGS). The settings (except for date, time, floppy disk drive, and hard disk drive) should be similar to the following:

System		Date				1 1 - 2 7 - 9 8		M o n
System		Time				1 0 : 5 2 : 5 9
Base	Memory			Size		640 k B
Base	Memory Configuration All						Enabled
Extended			Memory			3072 k B
Floppy		Drive		A:		3.5	inch,		1.44	MB
Floppy		Drive		B:		Not	Present
Hard	Disk		#1			ESDI	- 142		MB
Hard	Disk		#2			Not	Present
80387 Numeric				Coprocessor		Not	Present
3167 Numeric				Coprocessor		Not	Present
Video		Display				EGA	or V G A
K e y b o a r d						P r e s e n t
System		Serial		Port	#1	Enabled		as	Com	1
System		Serial		Port	# 2	D i s a b l e d
ROM	BIOS		Map	Address		1 MB	Only
Speaker:						On
Redirect		Corn		1:		D i s a b l e d
Redirect		Corn		2:		D i s a b l e d
CPU	Speed					Fast
Shadow		RAM C o n t r o l				D i s a b l e d
Cache		Control				E n a b l e d
Power-on Memory Test						On
Parallel			Port			Enabled		as	LPT1
You may find it necessary to modify the Extended								Memory,

System Serial Port #2, and Shadow RAM Control entries. You should also set the correct date and time.

2-57