Software Installation
Installing AUDIX Voice Power File System Modification Software
The AUDIX Voice Power File System Modification Software must be installed before any other application package.
To install the AUDIX Voice Power File System Modification Software, follow these steps:
1.Log in as root (if you are not already logged in).
2.At the # prompt, type installpkg and press (Enter). For systems with an installed tape drive:
— The system displays
Please indicate the installation medium you intend to use.
Strike C to install from CARTRIDGE TAPE or F to install from FLOPPY DISKETTE.
Strike ESC to stop.
—Type f.
For systems with more than one floppy disk drive:
— The system displays
This system has two floppy drives. Strike ENTER to install from drive 0 or 1 to install from drive 1.
—Type 1 and press (Enter) to select drive 1, or just press (Enter) to select drive 0.
N O T E :
If the system configuration includes a tape drive or multiple floppy disk drives, additional prompts may appear. Use the preceding steps as a guide to responding to the system prompts. The actual prompts may vary depending on the system configuration.