Sterling Plumbing scc2 specifications SCC 2-Pump 20-Station Controllers

Page 1

SCC 2-Pump 20-Station Controllers

Part Number: 882.00251.00

Bulletin Number: CV3-630

Effective: 10/25/05

Write Down Your Serial Numbers Here For Future Reference:

_________________________	_________________________
_________________________	_________________________
_________________________	_________________________

We are committed to a continuing program of product improvement.

Specifications, appearance, and dimensions described in this manual are subject to change without notice.

DCN No. ____________

© Copyright 2005 All rights reserved.

Hopper Loaders with/without Sight Glasses

i

Image 1

Contents SCC 2-Pump 20-Station Controllers Parts and Service Department Shipping Information Credit Returns Warranty ReturnsTable of Contents Safety Restoring a LOST/CORRUPT PROGRAM...380 How to Use This Manual SafetySafety Symbols Used in this Manual Wear Safety Glasses and Work Gloves Controller Safety TagsSafety Circuit Standards Safety Devices and InterlocksSafety Device Lock-Outs Fail Safe OperationGeneral Responsibility ResponsibilityOperator Responsibility Reporting a Safety Defect Maintenance ResponsibilityFunctional Description Standard FeaturesModels Covered in This Manual General DescriptionController Features Optional FeaturesUncrating InstallationMounting the Control Panel Pump 20 Station Controller with 6 Display Located on the side of the controller box Controller Identification Serial Number TagConnecting the Control Panel to Vacuum Hoppers Making Control Panel Power Drop Wiring ConnectionsConnecting the Control Panel to the Pump Package Electrical ConnectionsSet-up Setting the Number of Stations and the Number of PumpsMenu Screen System Setup Screen Setting Up Alarm DurationSetting Up Touch Switch Delay Setting Up Pump StagingSetting Up a Single Station Setting Up StationsCopying Settings from One Station to Others Station Setup ScreenStation Copy Screen Setting Up a Single Pump Setting Up PumpsCopying Settings from One Pump to the Other Pump Setup ScreenPump Copy Screen Setup Password Finishing Setup Setting Up PasswordsOperator Password Page Initial Startup Overview OperationBasic Tasks Reviewing Station StatusPump Status Screen During Operation Reviewing Pump StatusLogging On and Logging Off Password Entry ScreenEnabling and Disabling Stations and Pumps Starting and Stopping the System Reviewing and Adjusting Basic Station SettingsNavigating Among the Station Operator Screens Adjusting Convey Time and Dump DelayReviewing and Resetting a Pump Hour Meter Adjusting Advanced SettingsActivating and Stopping Priority Convey for a Station Transferring Stations to a Standby Pump Transfer To Standby Pump Screen Standby Pump Errors AlarmsReviewing Alarms Silencing Alarms Alarm Log ScreenRestoring a Lost or Corrupt Program Corrective MaintenancePLC Memory Module Page Station Setup Factory Presets Configurable Settings/DefaultsPump 20-Station Controllers Configurable Settings/Defaults Idle Time Options Pump Setup Factory PresetsGeneral Troubleshooting TroubleshootingPump Alarms Station AlarmsSystem Alarms Drawings and Diagrams WarrantyAppendix AC Voltage Spare Parts ListDC Voltage Technical Assistance Contact Information Service DepartmentParts Department Sales Department