Sterling Plumbing scc2 specifications Alarm Log Screen, Silencing Alarms

Page 42

Figure 20: Alarm Log Screen

To scroll up and down through the list, touch ▲ and ▼ at the bottom of the list.

Silencing Alarms

Whenever a new alarm occurs, your controller sounds the horn and turns on the strobe light at each central alarm.

Touch Alarm Silence on the alarm message banner that appears when a new alarm occurs or press the physical push button included in the central alarm option.

The horns and lights at the central alarms turn off. Your controller has separate, configurable settings for how long the horns should remain silent and how long the lights should remain off. (see “Setting U1p Alarm Duration” on page 19). If the alarm condition still exists when either of these times elapses, the corresponding device (horn or lights) turn on again and the alarm message banner appears with a “Suppression/Silence Time Expired” message. If a new alarm occurs, both horns and lights turn on. See page 436 for a list of alarms and their possible causes.

2–Pump 20-Station Controllers

Operation

37 of 51

Image 42

Contents SCC 2-Pump 20-Station Controllers Parts and Service Department Shipping Information Warranty Returns Credit ReturnsTable of Contents Safety Restoring a LOST/CORRUPT PROGRAM...380 Safety How to Use This ManualSafety Symbols Used in this Manual Controller Safety Tags Wear Safety Glasses and Work GlovesSafety Device Lock-Outs Safety Devices and InterlocksSafety Circuit Standards Fail Safe OperationResponsibility General ResponsibilityOperator Responsibility Maintenance Responsibility Reporting a Safety DefectModels Covered in This Manual Standard FeaturesFunctional Description General DescriptionOptional Features Controller FeaturesInstallation UncratingMounting the Control Panel Pump 20 Station Controller with 6 Display Controller Identification Serial Number Tag Located on the side of the controller boxConnecting the Control Panel to the Pump Package Making Control Panel Power Drop Wiring ConnectionsConnecting the Control Panel to Vacuum Hoppers Electrical ConnectionsSetting the Number of Stations and the Number of Pumps Set-upMenu Screen Setting Up Alarm Duration System Setup ScreenSetting Up Pump Staging Setting Up Touch Switch DelaySetting Up Stations Setting Up a Single StationStation Setup Screen Copying Settings from One Station to OthersStation Copy Screen Setting Up Pumps Setting Up a Single PumpPump Setup Screen Copying Settings from One Pump to the OtherPump Copy Screen Finishing Setup Setting Up Passwords Setup PasswordOperator Password Page Initial Startup Basic Tasks OperationOverview Reviewing Station StatusReviewing Pump Status Pump Status Screen During OperationPassword Entry Screen Logging On and Logging OffEnabling and Disabling Stations and Pumps Reviewing and Adjusting Basic Station Settings Starting and Stopping the SystemAdjusting Convey Time and Dump Delay Navigating Among the Station Operator ScreensAdjusting Advanced Settings Reviewing and Resetting a Pump Hour MeterActivating and Stopping Priority Convey for a Station Transferring Stations to a Standby Pump Transfer To Standby Pump Screen Alarms Standby Pump ErrorsReviewing Alarms Alarm Log Screen Silencing AlarmsCorrective Maintenance Restoring a Lost or Corrupt ProgramPLC Memory Module Page Configurable Settings/Defaults Station Setup Factory PresetsPump 20-Station Controllers Configurable Settings/Defaults Pump Setup Factory Presets Idle Time OptionsTroubleshooting General TroubleshootingStation Alarms Pump AlarmsSystem Alarms Warranty Drawings and DiagramsAppendix Spare Parts List AC VoltageDC Voltage Parts Department Service DepartmentTechnical Assistance Contact Information Sales Department