Figure 11: Pump Setup Screen
Blowback
5
Pulses
3.Adjust settings as required. Touching any box that appears in red (for “disabled”) toggles it to green (for “enabled”), and vice versa. Touching any box that appears in white gives you a keypad to enter a new value.
See page 422 for details on the options and their default settings.
4.As appropriate, setup the rest of the pumps using either of the following methods:
•Copy this pump’s settings to one or more other pumps, as described below
•Use the Back or Next buttons to navigate to other pumps. Touch Back to go to the previous “Pump Setup” screen, or touch Next to go to the next “Pump Setup” screen.
•Touch Goto and enter a pump number to go to that pump’s setup screen .
Copying Settings from One Pump to the Other
If another pump at your facility will use the same settings as a pump you have already set up, you can copy the settings from this pump to another. To do so:
At the “Pump Setup” screen (Figure 11) for the pump you want to copy from, touch Copy in the upper right corner. The Pump Copy screen appears, showing the pump number for the pump you are copying from.
Hopper Loaders with/without Sight Glasses | 22 |