Sterling Plumbing scc2 specifications Operation, Overview, Basic Tasks, Reviewing Station Status

Chapter 4: Operation

4-1 Overview

Your 2-pump, 20-station controller electrically controls valves and solenoids to convey material from a central location to individual stations as needed. The controller senses demands for material at the stations and responds to the demands in a timely fashion.

This section gives the procedures for using your controller, and it covers tasks that can be carried out with no password or with an operator’s password. The section is divided into three sub-sections:

•Basic tasks: tasks normally carried out by a station operator

•Advanced tasks: tasks normally carried out by setup personnel

•Alarms: silencing and clearing alarms

Note: Before you carry out any of the procedures in this chapter, the system must be set up as described in the previous chapter.

4-2 Basic Tasks

Reviewing Station Status

The starting point for all operations is the “Station Status” screen. To reach this screen from any other screen, touch Menu on the right-hand side of the screen, and then touch Stations. The “Station Status” screen appears.

Figure 13: “Station Status” Screen During Operation

Stations

19-20

The status of each station is color-coded. You can see an explanation of each status by using the online help. To do so from this screen, complete the following steps:

1.Touch Menu. The “Menu” screen opens.

2.Touch Help. The “Help Menu” screen opens.

3.Touch Station States. The “Station Symbols Help” screen opens, explaining the status represented by each color.

2–Pump 20-Station Controllers Operation 27 of 51