Preparing your Stroller (continued)
›››IMPORTANT INFORMATION FOR DOUBLE AND TRIPLE STROLLERS
If you have a double or triple stroller you will need to remove the centre metal bars of the frame to release the domed fabric. You may then need to reattach the metal bars without the fabric, depending on whether you are attaching a Double or a Twin Carrycot. See chart below.
How to remove the centre bar(s)
1.Terrain only: undo seat base nut with a spanner at point F and remove hinge pin from seat base.
2.Urban and Terrain models: unfasten wing nut at point G and remove centre bar at both ends (points G and H).
Centre bar
Seat base
Heel rest
H
F
G
| Double Stroller Frame | Triple Stroller Frame |
|
|
|
Twin | No centre bar | No centre bar on side attaching Twin |
Carrycot |
| Carrycot. Centre bar remains on side not |
|
| accommodating Twin Carrycot. |
|
|
|
Double | Centre bar required. | Centre bar required. |
Carrycot | Remove hammock fabric | Remove hammock fabric from seat you |
| from seat you wish to | |
| wish to replace with Carrycot. Double | |
| replace with Carrycot. | |
| Carrycot can only be fitted to outside | |
|
| |
|
| seat positions. |
|
|
|