Configuration 2 Instructions
›››PLEASE FOLLOW THESE INSTRUCTIONS IF YOU ARE FITTING:
a:a Double Carrycot to a Double Stroller
b:a Double Carrycot to a Triple Stroller
c:a Twin Carrycot to a Triple Stroller
Fitting the Snap Locks and Slider Plate to the Carrycot
Preparation
Make sure you have all the necessary parts as outlined in this picture.
NB: The sliding plates part kit is not supplied with a twin carrycot and will need to be separately purchased to attach the twin to a triple stroller. Also note that the snap locks used in Configuration 1 are different from those used in this instruction.
PARTS LIST
| Carrycot |
SLIDING PLATE PARTS KIT | |
2 x snap locks | 1 x cover buttons |
1 x sliding plate | 1 x screw |
2 x screws | 1 x Allen key |
Work out which side you want to
attach the Carrycot to. If you want to position the Carrycot onto the right side of stroller, put the snap locks onto the right side of the Carrycot and the sliding plate onto the left. To position the Carrycot onto the left side of the stroller the snap locks go on the left side of the stroller and the sliding plate on the right.
NB: Left and right are considered from the point of view of the user when they are pushing the buggy.
Attaching Snap Locks
1.Place one snap lock over hole A. Make sure it is
aligned correctly with the hole in Carrycot. | A |
2.Using Allen key, rotate screw in snap lock in clockwise direction until screw is tight. Snap lock will still be able to rotate but is firmly attached.
3.Connect second snap lock according to model directions for Urban or Terrain.