Installation and Connection
Mounting the inner dome
After setting is complete, mount the inner dome to the camera.
1. Mounting the inner dome
Mount the inner dome to the 3 clips.
Clip(x 3)
Inner
Dome
Mounting the dome cover
1. Cleaning the dome cover
Before mounting, remove any dust or dirt from the dome cover.
Memo:
●Dirt that is not removed from the cover before mounting may appear on the camera’s image.
Memo:
●Do not apply excessive force to the dome cover such as stretching it.
2. Mounting the dome cover to the base
Mount the dome cover by aligning the 3 position marks on the base with the dome cover.
3. Fastening the dome cover
Fasten by tightening the 3 fastening screws of the dome cover using the wrench supplied.
Position Alignment Mark (x 3)
Note:
●Mount the inner dome such that it does not cover the lens.
●When mounting the inner dome, make sure not to move the position of the lens. Doing so may cause the preset angle of view to go out of alignment.
3 
2
Wrench (Supplied)
30