Adjusting the video image
Upon mounting the camera, adjust the images while checking the actual image.
Mounting the test monitor
Connect the [MONITOR] terminal of this unit to the test monitor to adjust the camera’s shooting direction, angle of view and focus.
Memo:
●Before setting, ensure to turn on the power of the system.
[MONITOR] Terminal
75 K terminal
Test Monitor
Adjusting the shooting direction of the camera
The camera unit can be panned, tilted or rotated. Adjust the camera in the direction of the object.
Note:
●Before touching the camera unit, make sure to touch the metal surface of the [MONITOR] terminal to discharge any static electricity from your body. Static electricity may cause the camera to malfunction.
●Before adjusting the shooting direction of the camera, ensure that the pan fastening screw is loosened. Moving the lens unit without loosening the pan fastening screw may damage the lens unit.
Panning: ±175
Rotation: ±175
Tilting: ±70
Camera’s shooting direction mark
Pan center mark
UP | Rotation center mark |
O
N
Rotation knob
(
: Always adjust the rotation by holding this knob.
Memo:
●Panning/rotation of ±175 is possible from each of the camera unit’s shooting direction mark, pan center mark and rotation center mark. When adjusting the rotation, do not hold the lens unit. Always adjust by holding the rotation knob.
●When using the camera at locations with strong vibration after the angle of view is adjusted, stabilize by tightening the tilt fastening screw to prevent the camera’s angle of view from going out of alignment. (A Pg. 11)
Note:
●Moving the camera beyond its adjustable range may cause failure in maintaining the performance of this camera.
●As this camera has a wide tilt/rotation range, a part of this camera may appear on the screen depending on the angle of view and orientation.
●Do not hold the lens unit when adjusting the direction of the camera. Applying force on the lens unit may damage it.
25