JVC TK-C215VP4U/E, TK-C215VP12U/E manual Specifications,  Camera

Page 36

Others

Specifications

Camera

Signal system:

U type

: Based on NTSC standard

E type

: Based on PAL standard

Scanning frequencies

U type

: 15.734 kHz (Horizontal),

 

59.94 Hz (Vertical)

E type

: 15.625 kHz (Horizontal),

 

50 Hz (Vertical)

Image device: 1/4" IT CCD

Effective picture elements:

U type

: 380,000 pixels,

 

768 (H) x 494 (V)

E type

: 440,000 pixels,

 

752 (H) x 582 (V)

Sync system

 

 

: Line lock/Internal

Video S/N:

:50 dB (AGC OFF, white 50 % output)

Horizontal resolution:

: 540 TV lines (Center, Typ.)

Minimum illumination: (Typical)

TK-C215VP4U

Color mode

: 2.5 lx (Standard, AGC ON,

 

50 IRE, WIDE end)

 

: 0.8 lx (Standard, AGC ON,

 

25 IRE, WIDE end)

Black and White mode

 

: 1.4 lx (Standard, AGC ON,

 

50 IRE, WIDE end)

 

0.4 lx (Standard, AGC ON,

 

25 IRE, WIDE end)

TK-C215VP12U

 

Color mode

: 3.5 lx (Standard, AGC ON,

 

50 IRE, WIDE end)

 

: 1.1 lx (Standard, AGC ON,

 

25 IRE, WIDE end)

Black and White mode

:2.0 lx (Standard, AGC ON,

50 IRE, WIDE end)

0.6 lx (Standard, AGC ON,

25 IRE, WIDE end)

TK-C215VP4E

 

Color mode

: 2.9 lx (Standard, AGC ON,

 

50 IRE, WIDE end)

 

: 0.9 lx (Standard, AGC ON,

 

25 IRE, WIDE end)

Black and White mode

 

: 1.7 lx (Standard, AGC ON,

 

50 IRE, WIDE end)

 

0.6 lx (Standard, AGC ON,

 

25 IRE, WIDE end)

TK-C215VP12E

 

Color mode

: 4.2 lx (Standard, AGC ON,

 

50 IRE, WIDE end)

 

: 1.3 lx (Standard, AGC ON,

 

25 IRE, WIDE end)

Black and White mode

:2.4 lx (Standard, AGC ON,

50 IRE, WIDE end)

0.8 lx (Standard, AGC ON,

25 IRE, WIDE end

White balance

:ATW/Manual (Switchable) Color temperature range 2,300 K to 10,000 K

Backlight compensation

: ON/OFF (Switchable)

Easy DAY & NIGHT

: ON/OFF (Switchable)

36

Image 36
Contents TK-C215VP4U/E Instructions TK-C215VP12U/E For Customer UseIntroduction Safety Precautions For USA and CanadaDear Customer Characteristics Table of Contents Precautions for proper use of this product Storage and Location of UseOthers Maintenance Energy Conservation Note on consumable parts TK-C215VP12U/E onlyName of Parts CameraAC 24 V/DC 12 V Power Supply Wire Alarm signal cable TK-C215VP12U/E onlyVideo signal output connector BNC BaseCamera Interior MemoSetting the Switches Lens TK-C215VP4U/E RESET/SPOT RESET/SPOT buttonB,+/- R/B,+/- adjustment button Function selection switches AGC Auto-gain control switchSync Synchronization system selection switch WHT.BAL. ATW/MANUAL selection switchBLC Backlight compensation switch DAY/NIGHT Easy Day & Night switchAlarm Position status indication LED B,+/- R/B, +/- adjustment buttonPosition Select Position Select button Alarm alarm input mode selection switch TriggerSystem Example Metal ContactVideo signal cables DC 12 V or AC 24 V power supply cableAbout Connection Cables Electrical Specifications of Alarm Input Terminals ‹ Polarity of alarm signalsRight sequence to connect and set the camera Setting the switches Setting the switchesRemoving the dome cover Removing the inner domeSetup Mounting the fall prevention wire to a firm placeMounting the base Removing the camera unit from the baseConnecting the coaxial cable a Pg Connecting the AC 24 V/DC 12 V power supply wiresConnect the alarm cable. TK-C215VP12U/E onlyA Pg Cable ConnectionMounting the camera unit Fill the hole with sealing materialMounting the camera unit to the base Fastening the 2 fastening screws of the camera unitInserting the silica gel supplied Adjusting the video image Adjusting the shooting direction of the cameraMounting the test monitor Adjusting the angle of view, focus and brightness Adjusting the angle of viewAdjusting the focus  TK-C215VP4U/EAdjusting the brightness Adjust the focus Adjust the brightness TK-C215VP12U/E  Registering home position Registering alarm position Mounting the inner dome Mounting the dome coverMounting the camera using the electrical box Following procedures are same as normal mountingMounting the camera using the pipe Mounting the fall prevention wire to a firm place a PgMounting the base to the pipe Fastening the base to the ceilingRemoving the plug for the piping hole of the base White-spot correction Page Specifications  Camera Lens  General Dimensional Outline Drawing Focus chart TK-C215VP4U/E TK-C215VP12U/E Dome Camera