JVC Adjusting the angle of view, focus and brightness,  TK-C215VP4U/E, Adjusting the focus

Installation and Connection

Adjusting the video image (continued)

Adjusting the angle of view, focus and brightness

Upon determining the imaging direction, adjust the angle of view, focus and brightness accordingly.

Note:

●When adjusting the focus, make sure to cover the dome cover over the lens. The dome cover of this unit is thick. Therefore, if the focus is not adjusted with the dome cover covered, this may cause the lens to go out of focus when the dome cover is mounted.

●When adjusting the focus, cover the dome cover such that its center is perpendicular to the light axis of the lens, and make sure that the image is not distorted. (See illustration below)

*TK-C215VP4U/E is used in the above illustration

TK-C215VP4U/E(APg. 26)

TK-C215VP12U/E(APg. 28)

TK-C215VP4U/E

		Iris Level
L	H	Adjustment Dial

IRIS

LEVEL

Focus Adjustment

Button

FOCUS ADJUST

Zoom Adjustment

Ring

WT

Focus Adjustment Ring

NF

Adjusting the angle of view

Loosen the fastening screw for the zoom adjustment ring and move the ring to the left/ right to adjust the image.

Adjusting the focus

Press the focus adjustment button. The iris will be released for about 30 seconds. Loosen the fastening screw for the focus adjustment ring and move the ring to the left/right to align the focus.

Memo:

●Set by repeating [Adjusting the angle of view] and [Adjusting the focus] for 2 to 3 times. After adjustment is completed, fasten by tightening each of the fastening screws.

●The electronic shutter functions automatically upon pressing the focus adjustment button and the screen may flicker. However, this is not a malfunction.

26