Panasonic WV-NM100 operating instructions Front View, Rear View, Inside of the connector cover

Page 10

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

Front View

Dome cover

Power LED

You can select ON or OFF for the LED on the “System” page. (Refer to page 63.)

Rear View

Connector cover

To detach the connector cover, hold down

the part and slide it.

Alarm connector

Power plug connector

(Only use the AC adapter supplied)

Ethernet connector

Link LED (Lights up when communication with connected devices becomes possible.)

Access LED (Lights up when accessing to the network.)

Inside of the connector cover

! Important

Firmly insert the power plug of the AC adapter into the power plug connector of the camera.

HTML document initialization switch

All HTML documents return to the default settings (to the default settings of the latest upgraded firmware if the firmware has been upgraded) when the AC adapter is plugged into an outlet while this switch is pressed and kept pressed for five seconds or more after the plug is inserted.

Note:

It will take around 5 minutes to initialize all HTML documents. The power LED blinks during the initialization. It changes to steady light after the initialization has been completed.

Setting reset switch

All settings return to the default settings when the AC adapter is plugged into an outlet while this switch is pressed and kept pressed for five seconds or more after the plug is inserted.

10

Image 10

Contents Operating Instructions English Version Important Safety Instructions Contents Advanced Settings for Operation mode Features PrefacePrecautions Do not aim the camera at bright light sourcesPlatform MPEG-4 plug-in is exclusive to Internet ExplorerTrademarks and Registered Trademarks Front View Inside of the connector coverRear View Installations Connection example ConnectionsRequired cable Using with an Intranet LAN Connection type LANUsing via the Internet Connection type Required hardwareSetup Preparations for the SetupSetup with the Provided Panasonic IP Setup Software Items included in the softwareDhcp DNS Network Setup of the PC Using Windows 98 SEScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Basic setup page appears Click the Advanced setup button WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Hour, minute and second Power/Link/Access LEDCharacters for Camera name Up to 32 char Camera positionImage capture size Browsing PicturesMonitoring a Still Picture of a Single Camera Quality of imageImage Size Adjustment of the brightness of the picturePanning and tilting One time panMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Browsing Pictures Saving the Currently Monitored Picture on the PC Action when Motion is Detected Motion Detector FunctionInform by sending e-mails Detecting Motion in the Monitored Area Post-alarm External alarm inputPre-alarm Alarm typeSetting of the Motion Detection Area Alarm page appears Viewing the Picture Stored in the Camera To view the previous or next picture automaticallyTransferring Pictures to the Server Password ModeFile name Non alarm transmission Check onDirectory Date & TimeTransferring Pictures to the Server when Motion is Detected Customizing the Contents of the Alarm Mail Alarm Connector and AUX Output ConnectorOther Functions Advanced Settings Advanced Settings for Operation modeBandwidth control Operation mode selectionMPEG-4 mode setup Refresh intervalAdjusting the Picture Hold Sharpness PAN / Tilt calibrationSettings for the Host Authentication Access level Host addressSettings for the User Authentication Example admin System Settings Time setup year-month-day hourminsec Time adjustmentSynchronization with NTP server Time is adjust NTP portCharacters for Password Default setting for Host name WV-NM100 User nameDefault setting for User name Default setting for PasswordSnmp Settings Default setting for Location Default setting for Community name public Equipment nameDefault setting for Equipment name Community nameUsing Help Firmware UpgradeTroubleshooting Possible cause / Possible solutionIf the camera and the PC are connected Same subnet If the camera and the PC are connected in a Different subnetIf Netscape Communicator is used If Internet Explorer is usedSpecifications CameraGlossary of Terms Term ExplanationTerm N1102-1013 V8QA6036BN