Panasonic WV-NM100 operating instructions Using Help, Firmware Upgrade

Page 67

USING "HELP"

You can refer to the "Help" page for details about the items.

The "Help" page below appears by clicking the [Help] button.

You can display an explanation by clicking on the desired item.

FIRMWARE UPGRADE

You can upgrade the firmware of the camera to the latest version. Refer to the dealer whether the firmware upgrade is available.

Before upgrading the firmware, save the current firmware onto the hard drive of the PC.

STEP1

STEP2

Start up the browser and enter the following: http://xxx.yyy.zzz.nnn/admin/upload.html (xxx.yyy.zzz.nnn is the IP address of the camera.)

The “HTML and Firmware upload” page appears.

Click the [Browse…] button to select the firmware, and then click the [Upload] button.

The firmware upgrade starts. It will take approximately 5 minutes to complete uploading. (It may take more time depending on the network environment.) The “Top Menu” page will be displayed automatically when the upgrading is completed.

!Important

•Use a PC in the same subnet where the camera is installed to upload the firmware to the camera.

•When upgrading, confirm that the file name of the firmware is “firmware.img” in small caps.

•It will take around 70 seconds for the next screen to be displayed after the [Upload] button is clicked.

•Do not turn off the power of the camera or detach the Ethernet cable while uploading.

•Do not operate the web browser at all, not even for adjusting the window size.

•Initialize the HTML documents and the settings after uploading the firmware. Refer to page 10 for the initializa- tion.

67

Image 67

Contents Operating Instructions English Version Important Safety Instructions Contents Advanced Settings for Operation mode Preface FeaturesDo not aim the camera at bright light sources PrecautionsMPEG-4 plug-in is exclusive to Internet Explorer PlatformTrademarks and Registered Trademarks Front View Inside of the connector coverRear View Installations Connection example ConnectionsRequired cable LAN Using with an Intranet LAN Connection typeRequired hardware Using via the Internet Connection typePreparations for the Setup SetupItems included in the software Setup with the Provided Panasonic IP Setup SoftwareDhcp DNS Using Windows 98 SE Network Setup of the PCScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Basic setup page appears Click the Advanced setup button WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Camera position Power/Link/Access LEDCharacters for Camera name Up to 32 char Hour, minute and secondQuality of image Browsing PicturesMonitoring a Still Picture of a Single Camera Image capture sizeOne time pan Adjustment of the brightness of the picturePanning and tilting Image SizeMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Browsing Pictures Saving the Currently Monitored Picture on the PC Motion Detector Function Action when Motion is DetectedInform by sending e-mails Detecting Motion in the Monitored Area Alarm type External alarm inputPre-alarm Post-alarmSetting of the Motion Detection Area Alarm page appears To view the previous or next picture automatically Viewing the Picture Stored in the CameraTransferring Pictures to the Server Mode PasswordDate & Time Non alarm transmission Check onDirectory File nameTransferring Pictures to the Server when Motion is Detected Customizing the Contents of the Alarm Mail Alarm Connector and AUX Output ConnectorOther Functions Advanced Settings for Operation mode Advanced SettingsRefresh interval Operation mode selectionMPEG-4 mode setup Bandwidth controlAdjusting the Picture PAN / Tilt calibration Hold SharpnessSettings for the Host Authentication Host address Access levelSettings for the User Authentication Example admin System Settings NTP port Time adjustmentSynchronization with NTP server Time is adjust Time setup year-month-day hourminsecDefault setting for Password Default setting for Host name WV-NM100 User nameDefault setting for User name Characters for PasswordSnmp Settings Community name Default setting for Community name public Equipment nameDefault setting for Equipment name Default setting for LocationFirmware Upgrade Using HelpPossible cause / Possible solution TroubleshootingIf the camera and the PC are connected in a Different subnet If the camera and the PC are connected Same subnetIf Internet Explorer is used If Netscape Communicator is usedCamera SpecificationsTerm Explanation Glossary of TermsTerm N1102-1013 V8QA6036BN