Panasonic WV-NM100 operating instructions Setup with the Provided Panasonic IP Setup Software

Page 16

SETUP

Setup with the Provided "Panasonic IP Setup" Software

Set up the network of the camera by using the "Panasonic IP Setup" software included on the CD-ROM provided with the camera.

STEP1

When the provided CD-ROM is inserted into the CD-ROM drive of the PC, the launcher software starts up and the readme file is displayed.

Items included in the software

•SETUP

•Instructions

•MPEG-4 Installation

After reading the readme file, click the [SETUP] button.

Notes

•Double click "launch.exe" on the provided CD-ROM if the launcher software does not start up automatically.

•If a firewall (including software) exists, allow access to all UDP ports. Otherwise, it is impossible to use the “Panasonic IP Setup” software.

Screenshot 1

The "Panasonic IP Setup" starts up.

The MAC address and the IP address of the connected camera will be displayed. (Click the “REFRESH” button if they are not displayed.)

STEP2

Click the MAC address/IP address of the cam- era to be set up.

STEP3

Click the [NETWORK SETUP] button.

Notes

• When two or more cameras are connected, the MAC addresses and the IP addresses of all the connected cameras will be displayed.

• The “Panasonic IP Setup” software can rec- ognize only those cameras in the same sub- net.

• The updated MAC addresses and IP addresses of all the connected cameras that are in the same subnet will be displayed by pressing the REFRESH button.

16

Image 16

Contents Operating Instructions English Version Important Safety Instructions Contents Advanced Settings for Operation mode Features PrefacePrecautions Do not aim the camera at bright light sourcesPlatform MPEG-4 plug-in is exclusive to Internet ExplorerTrademarks and Registered Trademarks Front View Inside of the connector coverRear View Installations Connection example ConnectionsRequired cable Using with an Intranet LAN Connection type LANUsing via the Internet Connection type Required hardwareSetup Preparations for the SetupSetup with the Provided Panasonic IP Setup Software Items included in the softwareDhcp DNS Network Setup of the PC Using Windows 98 SEScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Basic setup page appears Click the Advanced setup button WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Power/Link/Access LED Characters for Camera name Up to 32 charHour, minute and second Camera positionBrowsing Pictures Monitoring a Still Picture of a Single CameraImage capture size Quality of imageAdjustment of the brightness of the picture Panning and tiltingImage Size One time panMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Browsing Pictures Saving the Currently Monitored Picture on the PC Action when Motion is Detected Motion Detector FunctionInform by sending e-mails Detecting Motion in the Monitored Area External alarm input Pre-alarmPost-alarm Alarm typeSetting of the Motion Detection Area Alarm page appears Viewing the Picture Stored in the Camera To view the previous or next picture automaticallyTransferring Pictures to the Server Password ModeNon alarm transmission Check on DirectoryFile name Date & TimeTransferring Pictures to the Server when Motion is Detected Customizing the Contents of the Alarm Mail Alarm Connector and AUX Output ConnectorOther Functions Advanced Settings Advanced Settings for Operation modeOperation mode selection MPEG-4 mode setupBandwidth control Refresh intervalAdjusting the Picture Hold Sharpness PAN / Tilt calibrationSettings for the Host Authentication Access level Host addressSettings for the User Authentication Example admin System Settings Time adjustment Synchronization with NTP server Time is adjustTime setup year-month-day hourminsec NTP portDefault setting for Host name WV-NM100 User name Default setting for User nameCharacters for Password Default setting for PasswordSnmp Settings Default setting for Community name public Equipment name Default setting for Equipment nameDefault setting for Location Community nameUsing Help Firmware UpgradeTroubleshooting Possible cause / Possible solutionIf the camera and the PC are connected Same subnet If the camera and the PC are connected in a Different subnetIf Netscape Communicator is used If Internet Explorer is usedSpecifications CameraGlossary of Terms Term ExplanationTerm N1102-1013 V8QA6036BN