Panasonic WV-NM100 operating instructions Specifications, Camera

Page 71

SPECIFICATIONS

●Camera

Effective Pixels	660 (H) x 492 (V)
Lens	F2.35
	Horizontal Angular field of view: 51°
	Focal length: 50 cm ~ ∞

Minimum Illumination:	10 lx (1 foot-candle) (30 fps, Slow shutter: OFF)
	2 lx (0.2 foot-candle) (Sensitivity up: 10 is selected)

Panning range	140° (–70° - +70°)

Tilting range	120° (–90° - +30°) when mounted on the wall

Pan / Tilt Preset Positions	8 positions

●Other Specifications

Power Source	9V DC, 330mA (using the supplied AC adapter)
Power Source (Supplied AC adapter)	120V AC, 60Hz, 200mA

Ambient Operating Temperature	0° C - +40° C (32°F - 104°F)

Ambient Operating Humidity	Less than 90% (no condensation)

Compression Methods	JPEG or MPEG-4

Resolution	JPEG:	VGA (640 x 480) / QVGA (320 x 240) / QQVGA (160 x 120)
	MPEG-4: CIF (352 x 288) / QCIF (176 x 144)

Picture Quality	JPEG:	Super Fine / Fine / Normal / Low
	MPEG-4: Fine / Normal / Low

Picture Display Size	x1.0 / x1.5 / x2.0 (resolution does not change)

Interface	10Base-T / 100Base-TX port (RJ-45) x1

Alarm Input	OFF:	Open or 4 V DC – 5 V DC
	ON:	Make contact with GND

Alarm Output	Collector output (Internal pull-up)
	OFF:	Open or 5V DC or less
	ON:	50 mA or less, 1 V DC or less

AUX Output	Collector output (Internal pull-up)
	OFF:	Open or 5V DC or less
	ON:	50 mA or less, 1 V DC or less

Weight	Approx. 180 g (0.4 lbs.) (AC adapter excluded)

Dimensions	95 mm (H) x 93 mm (W) x 61.5 mm (D)
	[3.74 in. (H) x 3.66 in. (W) x 2.42 in. (D)] (Wall-mounting bracket excluded)

STANDARD ACCESSORIES

AC Adapter (Part No. NOJBEF000001)	................... 1 pc.
CD-ROM	1 pc.
Quick Reference Guide	1 pc.
Screw	2 pcs.
Wall-mounting Bracket	1 pc.

71

Image 71

Contents Operating Instructions English Version Important Safety Instructions Contents Advanced Settings for Operation mode Preface FeaturesDo not aim the camera at bright light sources PrecautionsMPEG-4 plug-in is exclusive to Internet Explorer PlatformTrademarks and Registered Trademarks Rear View Inside of the connector coverFront View Installations Required cable ConnectionsConnection example LAN Using with an Intranet LAN Connection typeRequired hardware Using via the Internet Connection typePreparations for the Setup SetupItems included in the software Setup with the Provided Panasonic IP Setup SoftwareDhcp DNS Using Windows 98 SE Network Setup of the PCScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Basic setup page appears Click the Advanced setup button WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Camera position Power/Link/Access LEDCharacters for Camera name Up to 32 char Hour, minute and secondQuality of image Browsing PicturesMonitoring a Still Picture of a Single Camera Image capture sizeOne time pan Adjustment of the brightness of the picturePanning and tilting Image SizeMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Browsing Pictures Saving the Currently Monitored Picture on the PC Motion Detector Function Action when Motion is DetectedInform by sending e-mails Detecting Motion in the Monitored Area Alarm type External alarm inputPre-alarm Post-alarmSetting of the Motion Detection Area Alarm page appears To view the previous or next picture automatically Viewing the Picture Stored in the CameraTransferring Pictures to the Server Mode PasswordDate & Time Non alarm transmission Check onDirectory File nameTransferring Pictures to the Server when Motion is Detected Other Functions Alarm Connector and AUX Output ConnectorCustomizing the Contents of the Alarm Mail Advanced Settings for Operation mode Advanced SettingsRefresh interval Operation mode selectionMPEG-4 mode setup Bandwidth controlAdjusting the Picture PAN / Tilt calibration Hold SharpnessSettings for the Host Authentication Host address Access levelSettings for the User Authentication Example admin System Settings NTP port Time adjustmentSynchronization with NTP server Time is adjust Time setup year-month-day hourminsecDefault setting for Password Default setting for Host name WV-NM100 User nameDefault setting for User name Characters for PasswordSnmp Settings Community name Default setting for Community name public Equipment nameDefault setting for Equipment name Default setting for LocationFirmware Upgrade Using HelpPossible cause / Possible solution TroubleshootingIf the camera and the PC are connected in a Different subnet If the camera and the PC are connected Same subnetIf Internet Explorer is used If Netscape Communicator is usedCamera SpecificationsTerm Explanation Glossary of TermsTerm N1102-1013 V8QA6036BN