Screenshot 3
The "Host authentication" page appears.
STEP3
Begin the setting for the host authentication. "Host authentication"
Select "ON" or "OFF" to set whether to authenti- cate hosts or not.
"Host address"
Enter the IP address of the PC to be authenti- cated.
"Access level"
Select an access level from the following: Administrator / Camera control / Live viewing
"Administrator": Authorized to operate all functions of the camera
"Camera control": Authorized to monitor the picture and operate on the "Alarm log list" page and the "Camera control" page. Not authorized to operate on the "Basic setup" page and the "Advanced setup" page.
"Live viewing": Authorized only to monitor the picture. Not authorized to operate the camera.
STEP4
Click the [SET] button after completing the set- ting.
Click the "Delete Host" [o] button to check the IP address of the PCs registered in the host authentication. You can delete the selected host by clicking the [DEL] button below. Access level, which is surrounded by “[ ]”, will appear beside the host name registered.
Example: 192.168.0.20 [1]
59