Panasonic WV-NM100 operating instructions Wan

SETUP

Screenshot 6

The "Network" page appears.

STEP6

Set parameters for each item in the "Network" page.

The parameters differ depending on the con- nection type (refer to pages 12-14).

For further information, refer to the next page.

STEP7

Click the [SET] button after completing the setup.

! Important

After you click the [SET] button, the “Command Executing” message appears. (This message will appear even when you click the [SET] button in other windows.) Avoid doing any operation while the message is displayed.

Note

•About the address translation function (Static IP masquerade, Network Address Translation (NAT))

The address translation function changes a global IP address to a private IP address, and “Static IP masquer- ade” and “Network Address Translation (NAT)” have this function. This function is to be set in a router.

To browse camera pictures via the Internet by connecting the camera to a broadband router, it is necessary to assign a respective port number for each camera and address translation by using the address translation func- tion. For further information, refer to the operating instructions of the broadband router.

	Broadband router
Global address	Private address
for the WAN	for the LAN
vvv.xxx.yyy.zzz	192.168.0.254
Enter [Global IP address + : (colon) + port number]
in the “Address” box of the browser via the Internet.
vvv.xxx.yyy.zzz:82
vvv.xxx.yyy.zzz:81	Address translation
	vvv.xxx.yyy.zzz:82 →	192.168.0.2:82
Internet		Private address
		192.168.0.2
(WAN)
		Port number: 82
	Address translation
Cable modem or
xDSL modem	vvv.xxx.yyy.zzz:81 →	192.168.0.1:81
		Private address
		192.168.0.1
		Port number: 81

26