Panasonic WV-NM100 operating instructions Using with an Intranet LAN Connection type, Lan

Page 13

Using with an Intranet (LAN) (Connection type 2)

Connect the camera to an intranet (LAN) using an Ethernet switching hub or router when browsing camera pictures of a camera installed in the same LAN (the intranet of a company or home).

< Connection example >

Ethernet

switching hub or router

LAN

<Required hardware > Ethernet switching hub or router

<Required cable >

Ethernet cable (category 5 straight cable)

To an outlet (120 V AC)

AC adapter

To an outlet (120 V AC)

AC adapter

!Important

•Use an Ethernet switching hub or router suitable for 10Base-T/100Base-TX.

•Install also a LAN card suitable for 10Base-T/100Base-TX on the PC.

•All cameras connected to the network must use their own exclusive AC adapter.

13

Image 13

Contents Operating Instructions English Version Important Safety Instructions Contents Advanced Settings for Operation mode Preface FeaturesDo not aim the camera at bright light sources PrecautionsMPEG-4 plug-in is exclusive to Internet Explorer PlatformTrademarks and Registered Trademarks Front View Inside of the connector coverRear View Installations Connection example ConnectionsRequired cable LAN Using with an Intranet LAN Connection typeRequired hardware Using via the Internet Connection typePreparations for the Setup SetupItems included in the software Setup with the Provided Panasonic IP Setup SoftwareDhcp DNS Using Windows 98 SE Network Setup of the PCScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Basic setup page appears Click the Advanced setup button WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Characters for Camera name Up to 32 char Power/Link/Access LEDHour, minute and second Camera positionMonitoring a Still Picture of a Single Camera Browsing PicturesImage capture size Quality of imagePanning and tilting Adjustment of the brightness of the pictureImage Size One time panMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Browsing Pictures Saving the Currently Monitored Picture on the PC Motion Detector Function Action when Motion is DetectedInform by sending e-mails Detecting Motion in the Monitored Area Pre-alarm External alarm inputPost-alarm Alarm typeSetting of the Motion Detection Area Alarm page appears To view the previous or next picture automatically Viewing the Picture Stored in the CameraTransferring Pictures to the Server Mode PasswordDirectory Non alarm transmission Check onFile name Date & TimeTransferring Pictures to the Server when Motion is Detected Customizing the Contents of the Alarm Mail Alarm Connector and AUX Output ConnectorOther Functions Advanced Settings for Operation mode Advanced SettingsMPEG-4 mode setup Operation mode selectionBandwidth control Refresh intervalAdjusting the Picture PAN / Tilt calibration Hold SharpnessSettings for the Host Authentication Host address Access levelSettings for the User Authentication Example admin System Settings Synchronization with NTP server Time is adjust Time adjustmentTime setup year-month-day hourminsec NTP portDefault setting for User name Default setting for Host name WV-NM100 User nameCharacters for Password Default setting for PasswordSnmp Settings Default setting for Equipment name Default setting for Community name public Equipment nameDefault setting for Location Community nameFirmware Upgrade Using HelpPossible cause / Possible solution TroubleshootingIf the camera and the PC are connected in a Different subnet If the camera and the PC are connected Same subnetIf Internet Explorer is used If Netscape Communicator is usedCamera SpecificationsTerm Explanation Glossary of TermsTerm N1102-1013 V8QA6036BN