Panasonic WV-NM100 Transferring Pictures to the Server when Motion is Detected

Page 52

TRANSFERRING PICTURES TO THE SERVER

Transferring Pictures to the Server when Motion is Detected

Set for the pictures of the motion detection area to be transferred to the server when motion is detected by the motion detector function. The settings can be made on the "FTP client" page of "Alarm&Transmission". Refer to page 49 and 50 to display the "FTP client" page of "Alarm&Transmission".

STEP1

Set the items for "Alarm transmission setup". "Alarm transmission"

Check "ON".

You can select "ON" or "OFF" to set whether to transfer the pictures or not when an alarm occurs.

"Directory"

Enter the directory where the pictures should be stored.

"File name"

The file name to be transferred will be [File name (name of the picture entered by the user) + sequential number + month / day / hours / minutes / seconds / year].

The sequential number will be given automati- cally starting from 1.

! Important

The total number of characters of the directory name and the file name should not exceed 255.

STEP2

Click the [SET] button after completing the set- ting.

52

Image 52

Contents Operating Instructions English Version Important Safety Instructions Contents Advanced Settings for Operation mode Features PrefacePrecautions Do not aim the camera at bright light sourcesPlatform MPEG-4 plug-in is exclusive to Internet ExplorerTrademarks and Registered Trademarks Front View Inside of the connector coverRear View Installations Connection example ConnectionsRequired cable Using with an Intranet LAN Connection type LANUsing via the Internet Connection type Required hardwareSetup Preparations for the SetupSetup with the Provided Panasonic IP Setup Software Items included in the softwareDhcp DNS Network Setup of the PC Using Windows 98 SEScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Basic setup page appears Click the Advanced setup button WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Power/Link/Access LED Characters for Camera name Up to 32 charHour, minute and second Camera positionBrowsing Pictures Monitoring a Still Picture of a Single CameraImage capture size Quality of imageAdjustment of the brightness of the picture Panning and tiltingImage Size One time panMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Browsing Pictures Saving the Currently Monitored Picture on the PC Action when Motion is Detected Motion Detector FunctionInform by sending e-mails Detecting Motion in the Monitored Area External alarm input Pre-alarmPost-alarm Alarm typeSetting of the Motion Detection Area Alarm page appears Viewing the Picture Stored in the Camera To view the previous or next picture automaticallyTransferring Pictures to the Server Password ModeNon alarm transmission Check on DirectoryFile name Date & TimeTransferring Pictures to the Server when Motion is Detected Customizing the Contents of the Alarm Mail Alarm Connector and AUX Output ConnectorOther Functions Advanced Settings Advanced Settings for Operation modeOperation mode selection MPEG-4 mode setupBandwidth control Refresh intervalAdjusting the Picture Hold Sharpness PAN / Tilt calibrationSettings for the Host Authentication Access level Host addressSettings for the User Authentication Example admin System Settings Time adjustment Synchronization with NTP server Time is adjustTime setup year-month-day hourminsec NTP portDefault setting for Host name WV-NM100 User name Default setting for User nameCharacters for Password Default setting for PasswordSnmp Settings Default setting for Community name public Equipment name Default setting for Equipment nameDefault setting for Location Community nameUsing Help Firmware UpgradeTroubleshooting Possible cause / Possible solutionIf the camera and the PC are connected Same subnet If the camera and the PC are connected in a Different subnetIf Netscape Communicator is used If Internet Explorer is usedSpecifications CameraGlossary of Terms Term ExplanationTerm N1102-1013 V8QA6036BN