Panasonic WV-NM100 operating instructions Connections, Connection example, Required cable

Page 12

CONNECTIONS

Before starting the connections, confirm which type of connection meets your needs. The following explanations are provided for each connection type.

Prepare the required hardware and cables for your connection type before starting the connections.

! Important

Before starting the connections, confirm that all the power switches of the camera, the ADSL/cable modem, the switching hub and the PC are turned off, and that all power plugs are not connected to the outlet.

Connection between a PC and This Camera (Connection type 1)

Connect the camera and the PC directly using an Ethernet cable when browsing the camera pictures or performing the network settings of the camera.

< Connection example >

AC adapter

To an outlet (120 V AC)

Ethernet cable (category 5 cross cable)

< Required cable >

Ethernet cable (category 5 cross cable)

!Important

•All cameras connected to the network must use their own exclusive AC adapter.

•Use only the specified Ethernet cable, category 5 cross cable.

12

Image 12

Contents Operating Instructions English Version Important Safety Instructions Contents Advanced Settings for Operation mode Features PrefacePrecautions Do not aim the camera at bright light sourcesPlatform MPEG-4 plug-in is exclusive to Internet ExplorerTrademarks and Registered Trademarks Inside of the connector cover Front ViewRear View Installations Connections Connection exampleRequired cable Using with an Intranet LAN Connection type LANUsing via the Internet Connection type Required hardwareSetup Preparations for the SetupSetup with the Provided Panasonic IP Setup Software Items included in the softwareDhcp DNS Network Setup of the PC Using Windows 98 SEScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Basic setup page appears Click the Advanced setup button WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Power/Link/Access LED Characters for Camera name Up to 32 charHour, minute and second Camera positionBrowsing Pictures Monitoring a Still Picture of a Single CameraImage capture size Quality of imageAdjustment of the brightness of the picture Panning and tiltingImage Size One time panMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Browsing Pictures Saving the Currently Monitored Picture on the PC Action when Motion is Detected Motion Detector FunctionInform by sending e-mails Detecting Motion in the Monitored Area External alarm input Pre-alarmPost-alarm Alarm typeSetting of the Motion Detection Area Alarm page appears Viewing the Picture Stored in the Camera To view the previous or next picture automaticallyTransferring Pictures to the Server Password ModeNon alarm transmission Check on DirectoryFile name Date & TimeTransferring Pictures to the Server when Motion is Detected Alarm Connector and AUX Output Connector Customizing the Contents of the Alarm MailOther Functions Advanced Settings Advanced Settings for Operation modeOperation mode selection MPEG-4 mode setupBandwidth control Refresh intervalAdjusting the Picture Hold Sharpness PAN / Tilt calibrationSettings for the Host Authentication Access level Host addressSettings for the User Authentication Example admin System Settings Time adjustment Synchronization with NTP server Time is adjustTime setup year-month-day hourminsec NTP portDefault setting for Host name WV-NM100 User name Default setting for User nameCharacters for Password Default setting for PasswordSnmp Settings Default setting for Community name public Equipment name Default setting for Equipment nameDefault setting for Location Community nameUsing Help Firmware UpgradeTroubleshooting Possible cause / Possible solutionIf the camera and the PC are connected Same subnet If the camera and the PC are connected in a Different subnetIf Netscape Communicator is used If Internet Explorer is usedSpecifications CameraGlossary of Terms Term ExplanationTerm N1102-1013 V8QA6036BN