Panasonic WV-NM100 operating instructions Basic Settings

Page 30

SETUP

Basic Settings

After completing the network setup of the PC and the camera, begin the basic settings of the camera.

The basic settings are the minimum settings required to operate the camera, such as date setting and setting of "Operation mode".

Screenshot 1

Begin the setup when the PC is in the same condition as just after the startup.

STEP1

Start up Internet Explorer on your PC.

Screenshot 2

The browser starts up. The web page set as the home page in your browser appears.

(The picture is the page of the Panasonic web site.)

STEP2

Enter the IP address assigned by the “Panasonic IP Setup” software in the “Address” box of Internet Explorer. (If the IP address has not been assigned yet, enter the default IP address “192.168.0.10”.)

You can confirm the assigned IP address by pressing the “REFRESH” button in the “Panasonic IP Setup” window.

If the broadband router is set to use the address translation, enter [IP address + : (colon) + port number] in the “Address” box, and press the enter key.

Refer to page 17 about the IP address setting.

30

Image 30

Contents Operating Instructions English Version Important Safety Instructions Contents Advanced Settings for Operation mode Features PrefacePrecautions Do not aim the camera at bright light sourcesPlatform MPEG-4 plug-in is exclusive to Internet ExplorerTrademarks and Registered Trademarks Inside of the connector cover Front ViewRear View Installations Connections Connection exampleRequired cable Using with an Intranet LAN Connection type LANUsing via the Internet Connection type Required hardwareSetup Preparations for the SetupSetup with the Provided Panasonic IP Setup Software Items included in the softwareDhcp DNS Network Setup of the PC Using Windows 98 SEScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Basic setup page appears Click the Advanced setup button WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Hour, minute and second Power/Link/Access LEDCharacters for Camera name Up to 32 char Camera positionImage capture size Browsing PicturesMonitoring a Still Picture of a Single Camera Quality of imageImage Size Adjustment of the brightness of the picturePanning and tilting One time panMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Browsing Pictures Saving the Currently Monitored Picture on the PC Action when Motion is Detected Motion Detector FunctionInform by sending e-mails Detecting Motion in the Monitored Area Post-alarm External alarm inputPre-alarm Alarm typeSetting of the Motion Detection Area Alarm page appears Viewing the Picture Stored in the Camera To view the previous or next picture automaticallyTransferring Pictures to the Server Password ModeFile name Non alarm transmission Check onDirectory Date & TimeTransferring Pictures to the Server when Motion is Detected Alarm Connector and AUX Output Connector Customizing the Contents of the Alarm MailOther Functions Advanced Settings Advanced Settings for Operation modeBandwidth control Operation mode selectionMPEG-4 mode setup Refresh intervalAdjusting the Picture Hold Sharpness PAN / Tilt calibrationSettings for the Host Authentication Access level Host addressSettings for the User Authentication Example admin System Settings Time setup year-month-day hourminsec Time adjustmentSynchronization with NTP server Time is adjust NTP portCharacters for Password Default setting for Host name WV-NM100 User nameDefault setting for User name Default setting for PasswordSnmp Settings Default setting for Location Default setting for Community name public Equipment nameDefault setting for Equipment name Community nameUsing Help Firmware UpgradeTroubleshooting Possible cause / Possible solutionIf the camera and the PC are connected Same subnet If the camera and the PC are connected in a Different subnetIf Netscape Communicator is used If Internet Explorer is usedSpecifications CameraGlossary of Terms Term ExplanationTerm N1102-1013 V8QA6036BN