Panasonic Characters for Host name, Default setting for Host name WV-NM100 User name

ADVANCED SETTINGS

DDNS Setup

DDNS (Dynamic Domain Name Service) enables you to access the camera by entering the host name and domain name.

“DDNS”

Select “ON” or “OFF” to set whether or not to use DDNS (Dynamic Domain Name Service). Making a connection to an exclusive server is required for the camera to be serviced.

“Host name”

Enter the host name given by the administrator of the server. Domain name can be omitted.

Characters for “Host name”

1 to 255 characters (ABCDEFGHIJKLMNOPQRSTU VWXYZabcdefghijklmnopqrstuvwxyz0123456789.-)

Default setting for “Host name”: WV-NM100

“User name”

Enter the user name given by the administrator of the server.

Characters for “User name”

1 to 32 characters (ABCDEFGHIJKLMNOPQRSTU VWXYZabcdefghijklmnopqrstuvwxyz0123456789!#$ %’=~`{}?_-^/@*.+)

Default setting for “User name”

Nothing is entered for this parameter.

“Password”

Enter the password given by the administrator of the server.

Characters for “Password”

8 to 32 characters (ABCDEFGHIJKLMNOPQRSTU VWXYZabcdefghijklmnopqrstuvwxyz0123456789!#$ %’()=~`{}<>?_-^[]/@*,.:;+\)

Default setting for “Password”

Nothing is entered for this parameter.

“Access interval”

Select 10 minutes, 30 minutes, 1 hour, 6 hours, or 24 hours for the access interval on DDNS for IP set- ting.

Default setting for “Access interval”: 1 hour

!Important

•If the setting item is overlapped between "Basic setup" and "Advanced setup", the latest setting has priority. For example, if a different setting is made on the "Operation mode" page after the same item has been set on the "Basic setup" page, the setting made on the "Operation mode" page is valid.

•When using the DDNS function, select ON for DNS in the “Network” page (refer to page 28), and be sure to set the IP address of the DNS server.

64