AXIS 215 PTZ Installation Guide | Page 9 |
12.Gently tighten the screws so that the ceiling tile is held between the inner and outer brackets. Check that none of the cabling is trapped by the brackets.
Note: When power is applied, check that the indicator LEDs indicate the correct condi- tions. See the table on page 16 for further details.
13.Using the supplied screwdriver, attach the smaller dome cover, using the 2 M4x10 resitorx screws.
ENGLISH
M4x10 resitorx screw
Replacing the dome glass
The dome cover can be fitted with the clear or the smoked plastic glass. To switch covers, use a torque T6 screwdriver to remove the 4 fastening screws on the inside of the dome, as shown here.
You are advised to take care when handling the plastic glass, to avoid scratching it. The wearing of cotton gloves is recommended.