OPERATION – BASIC
PUNCH
The Punch button enables the bass and treble response of the | Remote |
| |
audio output to be boosted for all listening levels. |
|
1. Press the PUNCH button to enable the Punch feature.
2. Press the PUNCH button again to disable.
NOTE: The panel will display "Punch" when the Punch feature is on.
PANEL DISPLAY
Tuner Mode:
The panel will display the band, FM1, FM2 or AM1, and the station frequency, unless the default has been changed to TITLE DEFAULT and a station title has been programmed in.
CD or CDX Modes
While playing a disc the panel will display the track number and the time played, also the disc number if in CDX mode, unless the default has been changed to TITLE DEFAULT and a disc title has been programmed in.
All Other Modes {Model 9210 only}
The panel will display the mode AUX1, unless the default has been changed to TITLE DEFAULT and a title has been programmed in.
PANEL DISPLAY DEFAULT
To set the default, press and hold the DISP button until | Remote |
the hours on the clock begin blinking. Immediately |
|
pressing MODE button allows selection of the default |
|
Display by toggling between Tuner frequency, or track |
|
time in CD Mode, and station or disc name, if titled. See |
|
PROGRAMMING TITLES for information. |
|
NOTE: A maximum total of 100 titles can be programmed into the unit.
OPERATION – TUNER
SELECTING A BAND | Remote |
Press the BAND button repeatedly to cycle through FM1, FM2, and AM. The act of selecting the band automatically enables that band.
TUNER OPTIONS
DX and AMERICAS are the default Tuner Options settings. The bracketed options are alternate options.
•DX [LOCAL]
•AMERICAS [EUR/AUST]
•P. PLAY [EJ MUTE]
Selecting Tuner Options
See SETUP OPTIONS to change tuner options.
12