Rockford Fosgate RFX9110G manual Pause CD, Direct Track Access, Magazine Eject, CD Changer Reset

OPERATION – CD PLAYER

Pause CD

1. Press the MUTE (Mute/Pause) button to pause the	Remote
CD.

2. Press the MUTE (Mute/Pause) button a second time to resume playing the disc.

NOTE: The panel will display PAUSE and the track number until the function is canceled.

Direct Track Access

Remote

Direct Track Access allows any track to be immediately selected and played. This method is faster than manually cycling through each track on the disc.

1. Press the T-ACC (AS–TRACK ACC) button to select Direct Track Access mode.

2.Press the number, 1-2-3-4-5-6-7-8-9-0, to access the desired track on the disc.

EXAMPLE: Pressing the T-ACC (AS–TRACK ACC) button, then 01 takes you to track 1, pressing 12 takes you to track 12 and so forth. Pressing just 1 digit, 7, will take you to track 7 after 5 seconds.

RFX8810 CD Changer Operation (Optional Accessory, Model 9210 Only)

Magazine Eject

1.Press the EJECT button to release the disc magazine from the CD changer.

NOTE: The panel will display NO CD, if in CDX mode, then go to AUX1 mode.

CD Changer Reset

8

7

6

5

4

3

2

1

RESET EJECT

Press the RESET button if the changer gets jammed during operation.

Loading Disc to the Magazine LABEL SIDE UP

1.Pull out the desired disc tray number from the magazine.

2.Place the disc into the magazine, label side up.

3. Push the disc tray back into the magazine.

NOTE: Discs numbers are arranged from the bottom up.

Loading the Magazine to the CD Changer

The INSERT IN THIS DIRECTION arrow indicates the proper direction that the magazine should be loaded into the CD changer.

CAUTION: Avoid installing or leaving the magazine where it

!would be subject to high temperatures such as from direct sunlight or from hot air from the heater. Doing so will damage the unit.

COMPACT

16