Rockford Fosgate RFX9210G manual Servo Error, TOC Error, Radiated Noises, CD skips, Excessively

TROUBLESHOOTING

SYMPTOM DIAGNOSIS

REMEDY

ERROR 3 (Loading Error)

ERROR 4 (Eject Error)

ERROR 6 (Transverse Error)

Foreign objects are preventing the disc from loading

Loading area in mechanism and loading motor (or driving circuit) is defective

Foreign objects are preventing disc from ejecting

Eject area in mechanism and ejecting motor (or driving circuit) is defective

Transverse motor or switch is defective or Traverse area of disc is damaged

Check CDP mechanism load area by removing faceplate and repair as necessary

Repair the mechanism and loading motor (or driving circuit)

Check CDP mechanism eject area by removing faceplate and repair as necessary

Repair the mechanism and loading motor (or driving circuit)

Check CD mechanism motor and switch. Put in a different disc!

ERROR 7	Excessive dirt or dust on disc
(Servo Error)
	Disc is warped cracked or
	severely damaged
	Excessive scratches on disk
ERROR 9	Disc is cracked, warped or
(TOC Error)	severely damaged
	Laser pickup is defective
	Servo unit in CDP mechanism is
	not operating properly
Radiated Noises	No RF suppression of blower
	motors
	No RF suppression of switches
CD skips	Source unit mounted at an
excessively	incorrect angle
	Source unit not secured properly
	(Standard Mount)
	Source unit not secured properly
	(ISO Mount)

Clean disc to remove dirt or dust as necessary

Put in a different disc!

Put in a different disc!

Put in a different disc!

Have service center repair laser pickup

Check the servo circuit area and repair as necessary

Connect filter cap (Radio Shack #272-1085) in-line on B+ near blower motor.

Connect a .1µf – .01µf non-polarized capacitor across switch contacts

Check mounting angle of source unit (mount within ±20˚ from horizontal) and repair as necessary

Check tightness of installation sleeve and back strap; repair or replace as necessary

Check tightness of mounting screws and repair or replace as necessary

21