Pioneer PRS-A500 owner manual Power Indicator, BFC Beat Frequency Control Switch

Page 5

Power Indicator

The power indicator lights when the power is switched on.

BFC (Beat Frequency Control) Switch

If you hear a beat while listening to an MW/LW broadcast with your car stereo, change the BFC switch using a small standard tip screwdriver.

LPF (Low-Pass Filter)/HPF (High-Pass Filter) Select Switch

Set the LPF/HPF select switch as follows according to the type of speaker that is connected to the speaker output connector and the car stereo system:

LPF/HPF Select

Audio frequency range

Speaker

Remarks

Switch

to be output

Type

 

LPF (Left)

* — 40 to 120 Hz

Subwoofer

Connect a subwoofer.

 

 

 

 

OFF (Center)

Full range

Full range

 

 

 

 

 

HPF (Right)

* 40 to 120 Hz —

Full range

Use if you want to cut the

 

 

 

very low frequency range*

 

 

 

because it is not necessary

 

 

 

for the speakers you are

 

 

 

using.

 

 

 

 

* See the “Cut Off Frequency Control” section.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents PRS-A500 Contents Case of trouble Before Using This ProductCut Off Frequency Control Setting the UnitGain Control LPF Low-Pass Filter/HPF High-Pass Filter Select Switch Power IndicatorBFC Beat Frequency Control Switch To prevent damage and/or injury Connecting the UnitSpeaker Channel Speaker Type Power Connection Diagram Connect the wires to the terminal Connecting the Power TerminalAttach lugs to wire ends. Lugs not supplied Connecting the Speaker Wires Connecting the Speaker Output TerminalsTwo-channel mode stereo One-channel mode monoExample of installation on the floor mat or on the chassis InstallationTo prevent malfunction and/or injury Tapping-screws 4 ⋅ 18 mmAverage current drawn SpecificationsEjemplo de instalación en la alfombra ContenidoInterruptor BFC Interruptor de selección LPF Filtro de pasoEn caso de desperfectos Antes de usar este productoControl de frecuencia de corte Ajuste de esta unidadControl de ganancia Interruptor BFC Control de la frecuencia de batido Indicador de alimentaciónPrecaución Conexión de la unidadPara evitar daños y/o lesiones Canal de altavoces Tipo de altavoz AlimentaciónDeutsch Français Italiano Diagrama de conexiónAdvertencia Conexión del terminal de alimentaciónConecte los cables al terminal Conexión de los cables de altavoces Conexión del terminal de salida de altavozModo de dos canales estéreo Modo de uno canal monoPara evitar fallas de funcionamiento y/o lesiones InstalaciónConsumo de corriente promedio EspecificacionesNota Anschluss der Lautsprecher-Ausgang InhaltsverzeichnisLPF Tiefpassfilter/HPF Hochpassfilter Beispiel eines Einbaus auf einerSie einen einzelnen 4-Ω-Lautsprecher pro Kanal Vor Gebrauch dieses ProduktsIm Störungsfall Ausschaltfrequenz-Regelung Einstellen dieses GerätsVerstärkungsregelung LPF Tiefpassfilter/HPF Hochpassfilter-Wahlschalter StromanzeigeInterferenzschutzschalter BFC Vorsicht Anschluss der EinheitZur Vermeidung von Schäden und/oder Verletzungen Lautsprecherkanal Lautsprechertyp StromversorgungAnschlussschema Die Drähte an die Klemme anschließen Anschluss der StromversorgungWarnung ZusammendrehenZwei-Kanal-Modus Stereo Anschluss der Lautsprecher- Ausgang-KlemmenEin-Kanal-Modus Mono Links Lautsprecher RechtsEinbau Durchschnittliche Stromentnahme Technische DatenHinweis Exemple d’installation sur le tapis de sol Interrupteur BFC Commande de fréquenceTable des matières Raccordement des bornes de sortie vers lesEn cas d’anomalie Avant d’utiliser cet appareilRéglage de l’appareil Commande du gainCommande de la fréquence de coupure Témoin d’alimentation Interrupteur BFC Commande de fréquence de battementSélecteur LPF Filtre passe-bas/HPF Filtre passe-haut Sélecteur Gamme des fréquences Type de haut RemarquesPrécaution Raccordement de l’appareilPour éviter toute anomalie ou blessure Voie de sortie Type de haut-parleur PuissanceSchéma de raccordement Reliez les câbles aux bornes Raccordement de la borne d’alimentationFusible 30 a Comparti Intérieur du Ment Véhicule Moteur Borne positive De 14 mm Engagez le passe-câble enMode à une voie mono Mode à deux voies stéréoConnexion des câbles des haut-parleurs Raccordement des bornes de sortie vers les haut-parleurs’installez pas l’appareil Exemple d’installation sur le tapis de sol ou sur le châssisConsommation moyenne de courant Caractéristiques techniquesRemarque Indice Caso di difficotà Prima di usare questo prodottoComando della soglia della frequenza di taglio Regolazione di questa unitàComando del guadagno Commutatore BFC Comando della frequenza di battimento Indicatore dell’alimentazioneSelettore LPF filtro passa-basso/HPF filtro passa-alto Attenzione Come collegare l’unitàPer evitare danneggiamenti e/o lesioni Tipo di altoparlanti AlimentazioneUscita esterna Parte anteriore Prese di ingresso tipo RCA Schema di collegamentoCollegare i cavi al morsetto Come collegare il terminale dell’alimentazioneModo a due canali stereo Collegamento dei cavi d’altoparlantiModo a una canale mono Sinistra Altoparlante DestraPer evitare malfunzionamenti e/o lesioni InstallazioneCorrente media consumata CaratteristicheInhoudsopgave Voorbeeld van installatie op de vloermatVerbinden van de luidspreker Schakelaar voor de regeling van deLichte brandwonden Bij problemenAlvorens gebruik Regelaar voor drempelfrequentie Instellen van dit toestelVersterkingsregelaar Die u gebruikt SpanningsindicatorSchakelaar voor de regeling van de slagfrequentie BFC Waarschuwing Aansluiten van het toestelOm beschadiging en/of letsel te voorkomen Luidsprekerkanaal Luidsprekertype VermogenAansluitschema Sluit de draden aan Aansluiten van het spanningsaansluitpuntVerbinden van de luidspreker- uitgangsaansluitingen Aansluiten van de luidsprekerdradenTwee kanalen functie stereo Een kanaal functie monoOm slechte werking en/of letsel te voorkomen InstallatieVoorbeeld van installatie op de vloermat of op het chassis Gemiddeld stroomverbruik Technische gegevensOpmerking Pioneer Corporation

PRS-A500 specifications

The Pioneer PRS-A500 is an exceptional addition to the world of car audio amplifiers, designed for enthusiasts seeking high-performance sound quality in their vehicles. Known for its power, versatility, and innovative technologies, this amplifier elevates the listening experience for any audio aficionado.

One of the standout features of the PRS-A500 is its robust power output. The amplifier delivers a peak power rating of 500 watts, ensuring that it can effectively drive high-performance speakers and subwoofers. Its ability to operate in both 2-channel and 4-channel configurations allows users to tailor their audio system to their specific needs, making it an ideal choice for a range of setups.

In terms of design, the PRS-A500 is built with high-quality components that enhance its overall durability and reliability. The amplifier uses a heat sink that efficiently dissipates heat, ensuring that the unit remains cool even during extended use. This durability is critical for maintaining performance over time and minimizing the risk of thermal shutdown.

The amplifier is equipped with advanced technologies that help deliver clear and dynamic sound reproduction. The inclusion of a built-in crossover allows users to control the frequency range sent to their speakers, optimizing performance based on the desired audio configuration. This feature is particularly useful for customizing the sound output to fit various genres of music.

Additionally, the PRS-A500 incorporates sophisticated signal processing capabilities. Its low-noise design ensures that the sound remains clear without the interference often found in lesser models. This is complemented by a high signal-to-noise ratio, providing a listening experience free from distortion and unwanted noise, allowing audiophiles to appreciate every nuance of their favorite tracks.

Installation is made simple thanks to user-friendly features like RCA inputs and an intuitive wiring layout. This amplifier also supports a variety of speaker configurations, further enhancing its appeal to a diverse range of users.

Overall, the Pioneer PRS-A500 is a powerful, versatile, and technologically advanced amplifier that meets the demands of car audio enthusiasts. Its combination of high power output, reliability, and customizable features make it a standout option for anyone looking to enhance their mobile audio experience. With the PRS-A500, users can expect nothing less than a thrilling auditory experience on the road.
Top Page Image Contents