Audiovox UCD200 owner manual Station Pre-Set Memories, Display Selector Disp, Mode Selector Mode

UCD200

OPERATING INSTRUCTIONS

11Station Pre-Set Memories

To set any of the 6 pre-set memory buttons, use the following procedure:

1.Turn the unit on and select the desired band.

2.Select the first station to be pre-set using the TUNE/TRACK buttons (7a and 7b).

3.Press and hold a pre-set button until you hear a confirmation tone. The pre-set number will appear on the display panel. The station is now stored and can be re- called at any time by momentarily pressing that button.

Repeat the above procedure for the remaining 5 pre-sets for current the band. Six stations can

13Display Selector (DISP)

This unit can display either the clock time or radio frequency/CD player functions. Press the DISP button (13) to display the time for approximately 5 seconds. The correct time-of- day can be set by pressing and holding the DISP button. This procedure is explained in the next step.

Setting the Clock

Press and hold the DISP button (13) until the clock flashes in the display. Press the TUNE/ TRACK () button (7b) to adjust the hour and the TUNE/TRACK () button (7a) to adjust the

minutes. Press the DISP button again to return to radio frequency or disc play.

14Mode Selector (MODE)

Press the MODE button (14) to change between radio and CD player operation. The current mode is indicated on the display panel.

During CD player operation, this button may be used to change to radio without ejecting the disc (the CD icon ( ) will remain on the display to show that a disc is still loaded). Press MODE again to return to CD player mode.

be stored for each of the bands.

12Equalizer Selector (EQ)

The EQ button (12) applies preset sound effects to the unit’s audio output signal. When pressed, it will activate one of the following modes: “CLS”, “POP”, or “ROC”. When the Equalizer function is active, the bass and treble levels can still be changed to accommodate the listener’s ear. When the EQ function is not active, the unit returns to the user-set bass and treble levels.

									7b	13	7a
	RELEASE										EJECT
		/
			UCD200								MON
	PWR
										DISP
12	EQ	AUDIO								TUNE	LOU
									TRACK
										BAND
	SEL				AM / FM / CD RECEIVER						MUT
		AMS	1	2 SCN	3 RPT	4 RDM	5	6	MODE
						11			14
		10