
UCD200
OPERATING INSTRUCTIONS
7Tuning Control
Seek Tuning
Press the TUNE/TRACK () button (7a) to tune the radio higher, or the TUNE/TRACK (
) button (7b) to tune the radio lower. The radio will seek the next strong station and stop.
Manual Tuning
To manually seek a specific station, first press and hold either the up or down TUNE/TRACK button until “MANU” appears on the display.
Press the up or down TUNE/TRACK buttons momentarily to tune two frequency steps at a time.
9FM Mono Select (MON)
During FM radio operation, the MON button (9) is used to select monaural or stereo reception of the broadcast signal. Under normal reception conditions, the unit should be left in the stereo mode (indicated by “ST” when tuned to an FM stereo signal). If the signal is too noisy for comfortable listening, press the MON button; the “ST” indication will disappear from the display panel and “MONO” will appear. To return to stereo reception mode, press the button again.
10Auto-Store / Pre-Set Scan Tuning (AMS)
Press the AMS button (10) momentarily to scan the 6 stations in the
If no further tuning is performed after five seconds, “AUTO” will appear momentarily on the display and tuning will revert to the original tuning mode.
8Audio Mute (MUT)
Press the MUT button (8) to silence the volume from the system. “MUTE” will appear on the display panel. Press MUT again (or activate another function) to return the volume level to the setting that was in use before the Mute function was activated.
|
|
|
|
|
|
|
| 7b | 7a |
|
RELEASE |
|
|
|
|
|
|
|
| EJECT |
|
| / |
|
|
|
|
|
|
|
|
|
|
| UCD200 |
|
|
|
|
|
| MON | 9 |
PWR |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| DISP |
|
|
EQ | AUDIO |
|
|
|
|
|
| TUNE | LOU |
|
|
|
|
|
|
| TRACK |
| |||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| BAND |
|
|
SEL |
|
|
| AM / FM / CD RECEIVER |
|
|
| MUT |
| |
|
|
|
|
|
|
|
|
| ||
| AMS | 1 | 2 SCN | 3 RPT | 4 RDM | 5 | 6 | MODE |
|
|
| 10 |
|
|
|
|
|
|
| 8 |
|
| 9 |
|
|
|
|
|
|
|
|
|