Audiovox UCD200 Bass Control Rear/Front Fader Control Loudness Control LOU, Treble Control

UCD200

OPERATING INSTRUCTIONS

4Bass Control

4 Rear/Front Fader Control 6 Loudness Control (LOU)

To adjust the bass level, first select the Bass mode by pressing the SEL button (4) until “BA” appears on the display panel. Within five seconds, press the AUDIO buttons (3a and 3b) to adjust the bass response from a minimum of “B--7” to a maximum of “B 7” (“B 0” represents a flat response).

4Treble Control

To adjust the treble level, press the SEL button

(4)until “TR” appears on the display panel. Within five seconds, press the AUDIO buttons (3a and 3b) to adjust the treble from a minimum of “TR -7” to a maximum of “TR 7”. “TR 0” represents a flat response.

To adjust the front/rear speaker balance, press the SEL button (4) until “F“ appears on the display panel. Within five seconds, press the AUDIO buttons (3a and 3b) to adjust the balance between the rear and front speakers from “FR 15” (full rear) to “FF 15” (full front). “F 00” represents an equal balance level between the rear and front speakers.

5AM/FM Band Selector (BAND)

During radio play, each time the BAND button

(5)is pressed, the radio band changes. The indications “AM 1”, “AM 2”, ” FM 1”, “FM 2”, or “FM 3” will appear on the display panel according to your selection.

When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Press the LOU button (6) to activate this feature as indicated by a beep tone and “LOUD” appearing on the display panel. (“LOUD” remains on the display.) Pressing the button again will sound a beep tone and “LOUD” will disappear from the display.

4Left/Right Balance Control

To adjust the left/right speaker balance, press the SEL button (4) until the “B” indication appears on the display panel (if not equally balanced, “BL” or “BR”, followed by the balance level, will appear). Within five seconds, press the AUDIO buttons (3a and 3b) to adjust the balance between the left and right speakers from “BL 15” (full left) to “BR 15” (full right). “B 00” represents an equal balance level between the left and right speakers.

RELEASE									EJECT
	/
		UCD200							MON
PWR
3a								DISP		6
								TUNE
EQ	AUDIO								LOU
								TRACK
3b								BAND
				AM / FM / CD RECEIVER					MUT
SEL
	AMS	1	2 SCN	3 RPT	4 RDM	5	6	MODE
4
								5
	8