Motorola I580 service manual Preparing for Field Level Testing Install Flip Assembly

PREPARING FOR FIELD LEVEL TESTING: Install Flip Assembly

6.Align the flip to the front housing to resemble closed flip. Using the black stick, push the Hinge Assembly Mechanism inward into the right knuckle of the front housing.

6

8

Figure 7-11.

7.Once set, check the hinge position by opening and closing the flip looking for binding or other unusual action. Flip should open smoothly, stay open, and close completely.

8.Align frame-flip center hinge within the slot between the left and right knuckle of the flip.

9.Insert the three T4 screw. Tighten clockwise to 0.5 in/lb.

68P80401P05 57