Bushnell 118328 instruction manual Standard, Vivid

CAPTURE MENU

Parameter	Settings	Function/Description
	(Bold=Default)
ISO	Auto, 100, 200, 400,	Sets the sensor’s sensitivity to light. “Auto” will automatically select lower ISO in bright light,
	800	higher ISO in lower light. Lower ISO settings=better image quality
Color	Standard, Vivid,	Standard=normal colors, Vivid=extra rich colors, Sepia=”antique” photo effect,
	Sepia, Monochrome	Monochrome=black & white photo effect.
Saturation	High, Normal, Low	Selects amount of color saturation. High=deeper colors, Low=softer colors.
Sharpness	Hard, Normal, Soft	Sets the amount of sharpening applied by the internal processor. You may want to select “Soft” if
		you prefer to add sharpening later using photo software on your PC.
Preview	On, Off	“On”=captured image is briefly shown on display immediately after snapping photo.
Time Stamp	Off, Date Only,	Select “Date Only” to imprint date on photos/videos. Select “Date & Time” to imprint both date
	Date&Time	and time. Be sure correct date/time has been set, using “Date Input” in the Setup Menu. Select
		Off (default) if you don’t want date or time imprinted on images.
Burst	On, Off	When set to “On”, a rapid series of 3 photos will be taken with each press of the SNAP button.
Noise Reduce	On, Off	“On”=software processing is automatically applied to help reduce appearance of digital noise
		(grain) in photos taken under low light and other difficult conditions.

12