4.Slide the Brace(29) ontothethreadedboltprotrud- ing fromthe TowerFrame(10). Threada 3/8" N/lock Nut (6) ontothethreaded bolt.Do notfight- en the Nylock Nut yet.
Place your foot on the extension and sl_gh_raise the front oftheTower Frame (10). Align the lower " end of the Brace (29) with the indicated 3/8" x
2 1/2" Co,age Bolt (1). Lowerthe Tower Frame so the Brace slidesonto the Carriage Bolt. Thread a 3/8" Nut (2) with a 3/8" Lack'washer(3) onto the Carrloge Bolt. Do not tighten the Nut yet.
5.With the helpof a secondperson,llftthe Upright(9) and lowerif ontothe two indicated 3/8" x 2 I/2" Carriage Bolts(1) in theRear Bose(8). Thread a 3/8" Nut (2) ancl 3/8" Lockwasher(3) onto each Carriage Bolt.Do not lighten the Nutsyet.
Attach the FrontBose(7) to the Upright(9) withtwo 3/8" x 3/4" Bolts(31).
_J .tighten the 3/8" Nylock Nut (6) attached in assem- bly step 4, and the seven 3/8" Nuts (2) a,ached in assembly steps 3 through 5.
•6. Attach the Foot PIo_ (102) to the Upright (9) with two 3/8" x 3/4" Bolts (31) and 3/8" Nylock Nuts
(6).
With the help of a secondperson, lift the Front Bose
(7). Peel the backing off three Rubber Pads (48). Presstwo onto the undersideof the Front Bose in the
indiealed locations, and one onto the underside of
the Upright (9). Lower the Front Bose.
Presstwo RubberPods(48) ontotheRearBose(8) in the somemanner.
4
29\6
s il | I.I |
31___6 | _ 48 |
4