SECTION 4: OPERATIONS
To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations.
Damage to your eyes or face could result from using this machine without proper pro- tective gear. Always wear safety glasses or a face shield when operating this machine.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all times to reduce this risk.
NOTICE
If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, review industry trade magazines, or get formal training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
Model G0695 (Mfg. Since 9/10)
Basic Controls
Refer to Figure 12 and the following descriptions to understand the basic controls of your mill.
Control Panel
|
| B |
| C |
A | ||||
|
|
|
|
|
|
|
|
|
|
F 
E | D |
|
Figure 12. Control panel.
A.Power Lamp: Lights when there is power to the machine.
B.Direction Switch: Controls the direction of spindle rotation.
C.Digital Speed Readout: Displays the spindle speed in revolutions per minute (RPM).
D.Speed Dial: Controls the spindle speed.
E.Stop Button: Turns the spindle OFF. You must twist this button clockwise so that it pops out before restarting the spindle with the ON button.
Note: Pressing this button DOES NOT DISCONNECT MILL FROM POWER.