Grizzly G0695 owner manual Downfeed Controls

Downfeed Controls

Refer to Figures 15–16and the following descrip- tions to understand the functions of the downfeed controls that affect the travel of the quill, spindle, and cutter.

A.Quill Dog: Moves with the quill. Use the pointer on the side of the dog with the downfeed scale to determine the depth of downfeed.

B.Downfeed Scale: Displays in 1⁄8" increments the amount of quill travel.

C.Coarse Downfeed Handle: When this han- dle is enabled with the downfeed selector, it raises/lowers the quill quickly.

D.Quill Lock: Locks the quill in place but does not affect spindle rotation.

E.Downfeed Stop & Lock: Stops downfeed travel when the quill dog reaches this point. Set the stop at any position along the downfeed scale, then secure it in place by tightening the lock up to it.

	B
A	C
	D
E

Figure 15. Downfeed controls viewed from the

right side.

F.Graduated Scale: Displays quill travel in 0.001" increments when the fine downfeed handwheel is used. One full revolution of the handwheel represents 0.080" of quill travel.

G.Fine Downfeed Handwheel: When this handwheel is rotated with the downfeed selector, it raises/lowers the quill in small increments.

H.Downfeed Selector: When rotated, enables either coarse or fine downfeed control. Tighten the selector to engage the fine downfeed handwheel, and loosen it to engage the coarse downfeed handle.

G

H

F

Figure 16. Downfeed controls viewed from the

left side.

Model G0695 (Mfg. Since 9/10) -21-