Grizzly Your Comprehensive Guide to G0695 Treadmill Instructions and Support

INTRODUCTION

Manual Accuracy

We are proud to offer this manual with your new machine! We've made every effort to be exact with the instructions, specifications, drawings, and photographs of the machine we used when writing this manual. However, sometimes we still make an occasional mistake.

Also, owing to our policy of continuous improve- ment, your machine may not exactly match the manual. If you find this to be the case, and the dif- ference between the manual and machine leaves you in doubt, check our website for the latest manual update or call technical support for help.

Before calling, find the manufacture date of your machine by looking at the date stamped into the machine ID label (see below). This will help us determine if the manual version you received matches the manufacture date of your machine.

Manufacture Date

of Your Machine

For your convenience, we post all available man- uals and manual updates for free on our website at www.grizzly.com. Any updates to your model of machine will be reflected in these documents as soon as they are complete.

Contact Info

We stand behind our machines. If you have any service questions, parts requests or general ques- tions about the machine, please call or write us at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

E-Mail: techsupport@grizzly.com

We want your feedback on this manual. If you can take the time, please email or write to us at the address below and tell us how we did:

Grizzly Industrial, Inc.

C/O Technical Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Email: manuals@grizzly.com

Machine Description

The Model G0695 vertical mill is used to remove material from metal workpieces with the use of a rotating cutting tool.

During most operations, the workpiece is clamped to the table, then moved into the rotating cutter in any combination of three paths.

This mill uses a frequency drive to convert incom- ing 220V single-phase power to 220V 3-phase for efficient performance from the spindle motor. Power is transferred directly to the spindle from the motor by a V-belt and pulleys.

Spindle speed is electronically controlled by using the variable speed dial and readout on the control panel.

-2- Model G0695 (Mfg. Since 9/10)