Grizzly G0695 owner manual Table Info

Table Info
Table Length	30 in.
Table Width	8 in.
Table Thickness	2 in.
No. Of T Slots	3
T Slots Width	1/2 in.
T Slots Height	7/8 in.
T Slots Centers	2-3/16 in.
Stud Size	3/8 in.
Spindle Info
Spindle Taper	R-8
End Milling Cap	1 in.
Face Milling Cap	3 in.
Draw Bar Diameter	7/16 in.
Draw Bar TPI	20 TPI
Draw Bar Length	12-3/8 in.
Spindle Bearings	Angular Contact
Construction
Table Const	Hardened & Precision-Ground Cast Iron
Head Const	Cast Iron
Column Const	Cast Iron
Base Const	Cast Iron
Paint	Urethane
Other Specifications:
Country Of Origin	Taiwan
Warranty	1 Year
Serial Number Location	Machine ID Label on Side
Assembly Time	1 Hour
Features:
One-Shot Lubrication
High Precision Ball Bearings
Bronze Nut on Longitudinal and Cross Feed Leadscrews
Variable Frequency Drive Speed Controls
Hardened and Precision Ground Leadscrews
Runs on Single-Phase Power Using a 3-Phase Inverter

Model G0695 (Mfg. Since 9/10) -5-