Grizzly G0695 owner manual Locks, Limit Stops

Locks

Use the table, saddle, and knee locks shown in Figures 18–19to secure the table in position.

X-Axis Table

Locks

Figure 18. X-axis table locks.

Z-Axis

Lock

Y-Axis Lock

Figure 19. Y-axis and Z-axis locks.

Limit Stops

Position the limit stops along the limit stop tracks to confine the distance the table or saddle can travel (see Figures 20–21).

X-Axis Limit

Stops

Limit Block

Figure 20. X-axis limit stops and block.

Model G0695 (Mfg. Since 9/10)

Limit Block

Y-Axis Limit Stops

Figure 21. Y-axis limit stops and block.

Always keep the table locked in place unless controlled movement is required for your operation. Unexpected table movement dur- ing operations could cause the cutter to bind with the workpiece resulting in damage to the cutter and workpiece, and possible personal injury.

-23-