Stairmaster 4200 PT, 4600 PT/CL Initial Service, Preventive Maintenance, Cleaning, Inspecting

MAINTENANCE INSTRUCTIONS

The 4200 PT console keeps track of the number of hours the machine was used and the total number of floors climbed. From the ATTRACT mode, press [+ ARROW] and then double-click [RESET]. The hours are shown in the top LCD window and the total floors are shown in the bottom LCD window.

INITIAL SERVICE

Upon receiving your machine, use a soft, clean towel to wipe off the dust which may have accumulated during shipping. Your new machine will require minor assembly. Refer to the “Installation Instructions” section for details.

PREVENTIVE MAINTENANCE

Most of these preventive maintenance procedures can be performed after removing the mid-cover. The preventive maintenance schedule is summarized in Table 3. The schedule is based on normal usage in a commercial health club environment; adjust the schedule to meet actual machine usage. Refer to the “Parts Removal and Replacement” section for all disassembly and assembly instructions.

Cleaning

1.DO NOT USE GLASS CLEANERS OR ANY OTHER HOUSEHOLD CLEANERs ON THE CONSOLE. Clean the console daily with a water- dampened cloth and wipe dry after cleaning.

2.Clean the exterior of the machine daily using soap and water or a diluted household cleaner such as Fantastic®.

3.Thoroughly clean the entire machine, including the interior, at least once a week (see Table 3).

Inspecting

1.Inspect the frame for any rust, bubbling, or paint chips during the weekly cleaning. The salt in perspiration can damage the unpainted surfaces.

Page 40